ForestGuard II Forestry Hose (Non-Stenciled)

An all synthetic, tough, ULC approved, non-percolating forestry hose, perfect for handling fire fighting, tank fill or high volume feeder lines.

Tough in ready for action but light in weight
Patented Mertex® lining process produces an amazingly thin but smooth inner waterway, yielding an extremely low friction loss for maximum flow
Available with Permatek™ HP treatment in a variety of colours, for even greater visibility and abrasion resistance
Resistant to most chemicals, petrol products, ozone and UV exposure, hydrolysis, rot and mildew
Will remain flexible to -55°C (-65°F)
Couplings:
- Threaded: Anozided Aluminum
- QC: Forged Aluminum Merlug
Meets or exceeds all performance requirements of NFPA 1961, Underwriter's Laboratories of Canada Spec S518.1, Factory Mutual, and USDA Spec 5100-187 for 1" (25mm) and 1.5" (38mm)

Available in other sizes (44mm and 65mm) and lengths
Available in other colors: Beige, Forest green, Orange, Red, Blue, Green, Yellow, Purple
ULC labeling must be requested is needed on the hose
Other stenciling requests

Hose Size	Service Pressure	Proof Pressure	Burst Pressure	Coil Dia./100'	Weight/100' Uncpld
1" (25mm)	300 psi	600 psi	1,000 psi	14" (36cm)	8lbs. (3.6kg)
1.5" (38mm)	300 psi	600 psi	1,000 psi	14" (36cm)	12lbs. (5.4kg)

Hose Configuration	25mm (1") QC x 50ft or 25mm (1") NPSH x 50ft or 25mm (1") QC x 100ft or 25mm (1") NPSH x 100ft or 25mm (1") NHT x 100ft or 25mm (1") NHT x 50ft or 38mm (1.5") QC x 100ft or 38mm (1.5") NPSH x 100ft or 38mm (1.5") QC x 50ft or 38mm (1.5") NPSH x 50ft or 38mm (1.5") QC x 25ft or 38mm (1.5") QC x 100ft - Stock (no customization) or 44mm (1.75") NPSH x 100ft or 65mm (2.5") BAT x 50ft or 65mm (2.5") BAT x 100ft or 65mm (2.5") BAT x 25ft or 65mm (2.5") QC x 50ft