- All Products
- PPE
- Fire-Dex FXM Stock Gear
To make things convenient for you, we offer a pre-defined turnout model with some of our most popular features.
Built with Armor AP™ (in gold), Milliken® CoreCXP™ L2, & Stedair® 3000, you don’t need to choose between elite protection and saving money.
This model comes standard with the following features:
- Thermoplastic Zippers
- Survivor® Flashlight Holder
- 3” Scotchlite® Trim, Lime
- DEXFLEX™ Elbows
- Knit Wrist Thumb Loops
- Semi-Bellow Handwarmer with Fleece & Kevlar® Lining
- Modern Tapered Hem
- H-Back Padded Suspenders with Cam Lock
- Low-Rise Waist
- Full-Bellow Pant Pockets with Rolled Flap
- DEXFLEX™ Knees with Foam Padded Knee Patches
- Reverse Tapered Cuffs
* Standard Coat Length is 29" in front and 33" in back
Tall Coat Length is 32" in front and 36" in back
* Custom Sizing available upon request. Must use FXM Standard Sizing Sheet
Feature Details
SEAMLESS COLLAR
Full thermal and moisture barrier protection without the annoying throat strap.
DEXFLEX ELBOW
Get more mobility with naturally bent elbows, helping the gear flow with your every movement.
SPACIOUS POCKETS
Securely hold all the tools you need for
the task at hand with bellow pockets. Reinforced with Kevlar® for the
best rip resistance.
MODERN TAPERED HEM
Climb, crawl, or lift your arms freely with our tapered hem, designed with extra length in the back to eliminate exposure.
COMFORTABLE WAIST
Find comfort in a traditional waist, with low rise.
SEAMLESS GUSSET
Lunging and crawling becomes easy with a pant design that keeps your occupation in mind.
DEXFLEX KNEES
Crawl, climb and kneel freely with comfortable, pre-bent legs that reduce restricted movement.
TAPERED BOOT CUFF
Minimize fabric wear and tear by reducing materials that drag or rub against the ground.
Fire-Dex Construction
Below are just a few examples of the attention to detail that is put into the design and manufacturing of Fire-Dex Turnout Gear.
DEEP WATER WELLS
No one likes water up their sleeves, especially during a fight again the fire.
Our deep sleeve water wells provide a natural glove/sleeve interface, keeping water out.
ADDED PROTECTION
Additional thermal protection is sewn to all high compression areas, such as knees, elbows, and shoulders for your protection.
DOUBLE LOCKSTITCHING
Manufacturers aren't required to use lock
stitch, but we do everything we can to improve your safety. We include
lock stitch on all major seams, cuffs, and reinforcements, with 4 rows
of lock stitch on all reflective trim and hook & loop closure
material.
LINER TABS
Retention snap tabs come standard on all
Fire-Dex coats to prevent bunching of layers. Each is carefully placed
for prevent abrasion.
ADVANCED PROTECTION
Inspections and testing are done throughout each stage of production to ensure quality and safety measures are met.
In fact, we have an entire lab within our production facility where we continually work to improve your safety.
Product Size | Coat - Small (38") or Coat - Medium (40") or Coat - Medium (40") - Tall or Coat - Medium (42") or Coat - Medium (42") - Tall or Coat - Large (44") or Coat - Large (44") - Tall or Coat - Large (46") or Coat - Large (46") - Tall or Coat - X-Large (48") or Coat - X-Large (48") - Tall or Coat - X-Large (50") or Coat - X-Large (50") - Tall or Coat XX-Large (52") or Coat - XX-Large (52") - Tall or Coat - XX-Large (54") or Coat - XX-Large (54") - tall or Coat XXX-Large (56") or Coat - XXX-Large (56") - Tall or Pants - Medium (36"-28") or Pants - Medium (36"-30") or Pants - Large (38"-30") or Pants - Large (38"x32") or Pants - Large (40"-30") or Pants - Large (40"x 32") or Pants - X-Large (42"x30") or Pants - X-Large (42x32) or Pants - X-Large (44"x30") or Pants - X-Large (44"x32") or Pants XX-Large (46x30) or Pants XX-Large (46"x32") or Pants - XX-Large (48"x30") or Pants - XX-Large (48"x32") or Pants - XXX-Large (52"x30") or Pants - (46"x31") * only 1 available or Pants - XXX-Large (52"x32") or Pants - XXX-Large (50"x30") or Pants - XXX-Large (50"x32") |