Frontier fog/smoke machine 1500 Watt is for users who
need a lot of fog along with a lot of control. These machines features a
wireless remote allowing the user to closely control the duration, and
volume of fog produced.
NOTE: do not use extension cords on these units, it increases the heat output which will burn out the controls.
- Built with durability, 110v 20amp power, and safety in mind.
- Includes a wireless remote which allows you to control output from a distance.
- Uses water-based fog fluid* that leaves no residue.
- Dmx-512 LCD controller
- Small low-profile design for easy storage.
- Efficient fluid consumption rate.
- Reliable high output.
- Overheat thermal protection.
- High performance smoke fluid gives you thick, realistic smoke you desire, but in a harmless and residue free form.
Specifications - Manual Output 1500 Watt
- Maximum Output: 20,000 cfm
- Consumption Rate: 1 L every 15 minutes, at 100% output
- Heater: 1,500 watt
- Heat Up Time:
- Initial heat-up: 7 - 10 minutes.
- Re-heat-up: 2 - 5 minutes.
- Tank Capacity: 2.5 L
- Dimensions: 18" L x 12" W x 7.5" H (46cm L x 30cm W x 19cm H)
- Dry Weight: 15 lbs. (6.8kg)
It
is very important to clean the fog machine as the fog will dry out in the unit
and
clog the pump causing it to overheat when you start it
up during the next training session.
Remove the tank from the
machine. Dump the remaining liquid back into the original container.
Put about a liter of distilled
water in the container and run it through the fogger before putting it away.
Never leave the fog juice in
the unit. Let the machine air dry once you have finished this procedure.
*fog/smoke fluid is sold separately
