Wildland CET Attack Pac Bush Buggy Package -

Wildland CET Attack Pac Bush Buggy Package – Fast, Flexible Wildland & Interface Firefighting 🚒

The CET Attack Pac Bush Buggy Package is a one-piece, drop-in skid unit that transforms any truck bed or trailer into a high-performance firefighting machine—ideal for wildland, urban interface, and rapid response. This all-in-one assembly combines a fully baffled water tank, a powerful portable pump, and a live hose reel, making it the go-to solution for municipal, industrial, and forestry fire authorities[2][3].

Key Features:

• Tank:
  • 200 Gallon Fully Baffled Polypropylene Tank — minimizes water slosh, improves stability, and meets NFPA requirements[2][3][4].
  • Upgrade Options: Larger tank sizes available for extended operations.
• Pump & Power:
  • 20hp Mid-Range Fire Pump — delivers outstanding performance across all fire scenarios.
  • Pump Output:
    • 265 GPM @ 50 PSI
    • 190 GPM @ 100 PSI
    • 115 GPM @ 150 PSI
    • 45 GPM @ 200 PSI[2][3][4]
  • 3 Gallon Fuel Tank: Ample runtime for extended deployments.
  • Engine Options: Gasoline standard, with diesel upgrade available.
• Hose & Plumbing:
  • Low Profile Electric Rewind Hose Reel — fast, tangle-free hose deployment and retrieval.
  • 1" x 100' Booster Hose — versatile for wildland and initial attack.
  • 2.5" Tank-to-Pump 1/4 Turn Ball Valve — quick, reliable flow control.
  • Steel Manifold with Multiple Outlets:
    • 1.5" Service Line (with cap and chain)
    • 0.75" Pressurized Garden Hose Connection[2][3]
• Controls & Convenience:
  • Lighted Control Panel — easy operation day or night.
  • Storage Frame & Optional Pre-Connected Hose Tray — keeps gear organized and ready to deploy.
  • Outrigger and Roller Options: For easy mounting and stability in the field.
• Foam System & CAFS Options:
  • Optional Scotty around-the-pump foam system with integrated foam cell for enhanced suppression and water efficiency.
  • CAFS (Compressed Air Foam System) upgrade available for rapid knockdown and extended attack capability.

Specifications at a Glance:

Actionable Tips:

• Pre-Deployment:
  • Inspect tank and pump for leaks or debris before use.
  • Check fuel and water levels, and prime the pump if needed.
• Operation:
  • Use the lighted panel for safe night or low-visibility operation.
  • Deploy the booster hose for rapid knockdown and maneuverability.
• Maintenance:
  • Clean and drain the tank after each operation.
  • Grease hose reel and check pump seals regularly for reliable use.

Alternative Perspectives:

• Larger Units: If your response area covers vast wildland or industrial settings, consider upgrading to a larger tank or additional hose length.
• CAFS Upgrade: For departments tackling complex, high-intensity fires, the CAFS system can provide unbeatable suppression and efficiency, though it requires additional operator training.

Setup and Operation Guide for the Wildland CET Attack Pac Bush Buggy Package 🚒

Preparation:

1. Inspect the Unit:
   • Check the water and fuel tanks to ensure they are filled and free of contaminants.
   • Inspect hoses, connections, and the pump for any signs of wear or damage.
2. Review Safety Protocols:
   • Ensure all operators wear appropriate PPE (Personal Protective Equipment).
   • Familiarize yourself with the control panel, including emergency shut-off procedures.

Setup:

1. Position the Skid Unit:
   • Secure the skid unit onto a stable truck bed or trailer using outriggers or tiedowns.
   • Ensure accessibility for refueling, maintenance, and operator access.
2. Connect Hoses:
   • Attach the booster hose to the appropriate discharge outlet.
   • Secure any additional hoses needed for your specific operation, using the manifold outlets.
3. Prepare the Foam System (if equipped):
   • Confirm foam concentrate levels in the foam cell.
   • Set the foam proportioning system to the desired concentration for the incident.

Operation:

1. Start the Engine:
   • Turn on the fuel valve, engage the choke if necessary, and start the engine using the starter.
   • Allow the engine to warm up before engaging the pump.
2. Engage the Pump:
   • Gradually open the tank-to-pump valve while monitoring the pressure gauge.
   • Adjust the throttle to maintain desired pressure and flow rate.
3. Deploy Hose and Apply Water/Foam:
   • Use the electric rewind hose reel to deploy the booster hose.
   • Utilize the discharge gun, selecting the appropriate spray pattern (fog, jet, atomized) for the situation.

Post-Operation:

1. Shutdown:
   • Close the discharge valve and throttle back the engine.
   • Turn off the engine and secure the fuel valve.
2. Maintenance:
   • Drain remaining water from the tank and hoses to prevent freezing or contamination.
   • Clean the unit, focusing on the pump, hoses, and foam system components if used.
   • Check and refill fluids as needed for the next operation.

Comparison with Foam-Based Bush Buggy Packages:

Foam-Based Bush Buggy Features:

• Foam Efficiency: Foam systems offer faster fire suppression and create effective fire breaks, reducing the amount of water needed.
• Versatility: Foam can be used for both structural and wildland fires, enhancing your response capability.
• Resource Management: Foam allows for extended operations with limited water resources.

CET Attack Pac Features:

• Water-Only Efficiency: Suitable for areas with abundant water supplies, offering a straightforward approach to firefighting.
• High Pressure Pumping: Provides strong suppression power, ideal for quickly controlling fires in wildland and urban interface areas.
• Modular Design: Easy integration onto a variety of vehicles, allowing for flexible deployment.

Considerations:

• Departments in water-scarce regions or with complex fire scenarios may benefit more from foam-based systems.
• The CET Attack Pac offers simplicity and high pressure, which can be advantageous for quick knockdowns and initial attacks.