Fire-Dex H41 Full Coverage Interceptor Hood w/ Nano Flex

The Interceptor™ Hood is made with a layer of DuPont™ Nomex® Nano Flex inside that acts as a filter to reduce firefighters' exposure to persistent fire ground carcinogens and other contaminants. This revolutionary material is sewn between two layers of knit 6 oz. PBI®/Lenzing (20%/80%) to provide the maximum performance for particle barrier filtration, comfort, and thermal & flashover protection. .

SCIENTIFIC DATA

• The Interceptor™ blocks 95% of particulates at .2 micron in size or larger
• For perspective, there are 25,400 microns in one inch and a human hair is about 75-100 microns wide, so a .2 micron particulate is about 500x smaller than a strand of hair
• Testing has shown that the particulates sized at less than .2 microns don't have enough mass to make it through the double layer knit and the Nomex® Nano Flex; essentially meaning that this hood blocks 100% of particulates less than .2 microns
• Nomex® Nano Flex is a revolutionary new material however, unlike FR moisture barrier membranes, this new lightweight (0.5oz/yd2) "barely-there" material is actually completely breathable
• Nomex® Nano Flex is a non-woven, web technology, made of submicron continuous fibers.

THE NEED FOR A PARTICLE BARRIER

The Interceptor™ with Nomex® Nano Flex was designed to keep potentially carcinogenic particulates and other harmful contaminants off of firefighters’ jaws, faces, and necks; areas identified as highly absorptive and more permeable than other areas of skin; areas likely not getting enough protection from hazardous particles with the FR knit hood technology that is currently available.

Features

• Low thermal conductivity: Naturally acts as an insulator while limiting the ability for heat to pass through.
• High Filtration Efficiency: Hoods with filtration technology protect against smoke particles and potentially harmful carcinogens up to 4x better than classic hoods.
• High Breathability: Wicking and air flow allows heat to release away from your head making sure you're able to regulate your temperature.
• Lamination reduces potential tearing
• TPP of 37.5
• THL of 388
• Certified to NFPA 1970