The new Ajax 8250H High Pressure Regulator now fits both 4500 PSI & 5500 PSI air cylinders.
Ajax Rescue Kit features an air hammer specially selected for its
durability and dependability. Every Rescue Kit includes an Ajax Kwik
Change Retainer. The Kwik Change Retainer was originally developed by
Ajax to hold the cutting tool securely in place, yet allowing the
technician to change tools in a matter of seconds during emergency
procedures. The Kwik Change Retainer also allows the technician the use
of Ajax Exclusive Non-turn chisel bits. These Non-turn bits can be
indexed into different positions to allow one-hand operation of the
hammer when necessary. The Ajax Kwik Change Retainer is the only
retainer that lets you use both Turn type and Non-turn type chisel bits.
The Ajax Rescue Tools high-pressure regulator has a universal design
which allows the technician to use either 2216 psi or 4500 psi air tanks
without having to change the regulator. This regulator is rated at an
operating pressure up to 300 psi, which is well above the recommended
operating pressure of most air tools. Normal body metals, such as, A, B
and C posts, quarter panels and firewalls require only 90 psi. However,
heavier metals, such as Nader pins, door hinges, etc., may require
150-160 psi. A safety blow-off valve prevents the technician from
exceeding the maximum pressure capacity level. This regulator lets you
operate the tool at the proper air pressure essential for the most
efficient operation while allowing you to use extra air power when
needed. This allows the rescue technician to adjust to a higher
operating pressure when attempting to cut through heavier steel, and
complete a successful rescue or extrication.
- User Friendly Architecture - The side mounted knob makes it
easier to adjust, with a more natural and safer hand/body position for
adjusting delivery pressure.
- Advanced Design - Smaller and lighter than our previous models.
Construction - Most regulators have multiple impact points. The Ajax
8250H regulator is designed with a single impact point configured to
help protect elements critical to system integrity.
- Compact Layout - Gauges are built in and recessed into the body for protection.
Flow Performance - They provide better flow control across a full range
of cylinder pressures, with exceptional sensitivity in delivery
- SLAM Technology - Shock Limitation and
Absorption Mechanism built into the adjusting knob helps protect vitals
and reduces the chance of injury in the event of a cylinder accident.
- Fits 4500 PSI & 5500 PSI air cylinders
- Dimensions: 7.5" L x 4" W x 4.5" H (19.1cm L x 10.2cm W x 11.4cm H)
- Weight: 4 lbs (1.8 kg)