Camlock Couplings

This product is no longer available.

Designed for use with liquids, consult Dixon for specific recommendations

Nitrile Rubber seals

To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down.
Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter.

Under no circumstances should cam and groove couplings be used for compressed air or steam service!
Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F with a standard seal installed. For use at elevated temperature or other unusual operating conditions, consult Dixon.

Designed to interchange with all products produced to A-A-59326D

Hardware Configuration

50mm (2") Cam Male x 50mm (2") Hose Shank or 50mm (2") Cam Female x 50mm (2") Hose Shank