Cutters Edge MULTI-CUT Fire Rescue Saw

Cutters Edge MULTI-CUT Fire Rescue Saw

    Cutters Edge MULTI-CUT Fire Rescue Saw

    Cutters Edge MULTI-CUT® Fire Rescue Saws are designed and built specifically for the fire rescue service. They deliver 100% reliable high performance cutting in hazardous, hot, and heavy smoke conditions.

    TOOL-LESS GUARD/DEPTH® GAUGE

    Provides maximum operator protection by covering all the cutting chain, but allows infinite depth-of-cut adjustments, from zero to eight inches deep, to prevent cutting rafters and supports. Tool-less design allows operator to install, adjust, or remove the Guard/Depth® Gauge quickly and easily, even with gloves on.

    ONE-PIECE GUIDE BAR

    Made from solid, steel alloy material with induction-hardened rails. A larger, integrated, sealed sprocket nose provides faster penetration, outstanding performance and longer life in the toughest cutting conditions. The thicker, one-piece construction cannot spread and eliminates failure due to misalignment. Available in 12", 16", & 20" lengths.

    CHAIN BRAKE

    The Chain Brake stops the rotation of the chain in less than 1/20th of a second. It can be engaged or disengaged manually or, just like the seat belts in a car, the violent action of kickback will activate the inertia chain brake and stop the movement of the chain.

    "SCRENCH TOOL" & TOOL HOLDER

    Handy, universal tool to be used for all adjustment and maintenance procedures on the Fire Rescue Saw.

    FOUR-STAGE FILTRATION SYSTEM

    The externally mounted air filtration system has 211.4 square inches of surface area, enabling Cutters Edge Fire Rescue Saws to run up to 12 times longer than conventional chain saws in the hot, smoky fire ground environment. The highly filtered, yet virtually unrestricted air moves into the carburetor through a metered stack that straightens the airflow and develops a "ram air" effect to increase power.

    TOOL-LESS CARBURETOR COMPARTMENT ENTRY

    This tool-less opening feature allows fast and easy manual access for inspection and maintenance of carburetor and spark plug and easily snaps back into place.

    CUTTERS EDGE ONE-STEP STARTING

    This feature includes a momentary contact switch and a combined choke throttle lock to eliminate the possibility of flooding and requires only one simple step to start the saw.

    MOMENTARY CONTACT SWITCH

    The momentary On/Off switch is always in the "On" position for reliable starting and to eliminate the possibility of flooding.

    FUEL MIX AND BAR & CHAIN OIL TANKS

    These large capacity tanks (Fuel mix-26.8 oz, Bar & Chain Oil – 14.24 oz) are sized so the saw will run out of fuel mix before running out of bar & chain oil, to prevent the possibility of running the chain without proper lubrication.

    FULL-WRAP HANDLE

    The Full-Wrap Handle assures safe operation of the saw in any position and acts as a "chain catch" to provide additional protection from contact with the chain.

    GUARD DEFLECTOR

    The Guard Deflector redirects the airflow around the engine, keeping cutting residue away from the engine, creating cooler running conditions for peak performance in any fire rescue environment.

    COMBINED CHOKE THROTTLE LOCK WITH THROTTLE SAFETY GUARD

    With one simple pull the choke and throttle are set for fast, easy starts.

    BULLET® Chain

    The BULLET Chain is the first and only chain designed from the ground up specifically for fire department ventilation, forcible entry, and rescue operations. The BULLET Chain’s patented cutter is a solid piece of metal without bends or groundout areas that cause weak points. The carbide insert is formulated specifically for fire department use. The sintered carbide insert creates a larger cutting surface and has a unique sheeting capability to reduce carbide breakage.

    COMPRESSION RELEASE

    The Compression Release button reduces compression inside the engine for easier starting.

    2-MASS ANTI-VIBRATION SYSTEM

    The anti-vibration system isolates the handles from the vibration of the saw, stopping it from being transferred to the operator’s hands. This reduces operator fatigue and increases safety.

    Specifications for Cutters Edge MULTI-CUT Fire Rescue Saw

    Product Options CE2172 16" blade with depth gauge and guard, 70cc, 6.2hp or CE2172 20" blade with depth gauge and guard, 70cc, 6.2hp