Skip to main content
[email protected] WFR is a wholesale distributor for the Canadian emergency services and does not sell to the public

Ambassador Monitor Trailers

485030205 (PFP-20HPHND-2D) 4" inlet
https://www.wfrfire.com/web/image/product.template/2175/image_1920?unique=4a10e18

Price upon Request
Freight is extra on this product


The Ambassador Monitor Trailer is designed to meet modern industrial firefighting and protection needs, especially for mitigating hazards involving flammable liquids in storage and gases under pressure. It is a mobile large-volume discharging platform capable of delivering up to 6,000 GPM (22,700 LPM) water or foam solution for fire suppression, cooling, personnel protection, toxic gas dispersion and more. Its optional Hydro-Chem capability delivers dry chemicals to extinguish 3-dimensional fires or gas pressure fires.  If more flow is needed, maximum flow rate of 8,000 GPM (30,000 LPM) is available on selected models.

The Ambassador trailer features an A-frame tow bar construction with integral waterway, an internal ballast and an external toolbox. The trailer has been purposely designed to reduce weight and maximize manoeuvrability with stability safety factor achieved by the water ballast tank to increase weight once staged for deployment.

Features & Benefits

Advanced “Hybrid” Nozzle Technology – Ambassador Monitor Trailers feature a unique “hybrid” nozzle that functions as an automatic or fixed flow nozzle. During automatic operation, the nozzle will respond to varying water supply of  2,000 to 6,000 GPM (7,570 to 22,700 LPM),  to maintain a nearly constant tip pressure of approximately 100 PSI (6.9 bar), thus maximizing its effective reach distance.  This is particularly useful in applications where the water supply may be inadequate or variable, or to establish initial discharge while more supply lines are being connected.

In fixed flow mode, the nozzle can be preset with the included fixed position plugs (flow stops) to a desired flow rate between 2,000 and 6,000 GPM (7,570 and 22,700 LPM), based on the specific situation. Flow rate and reach distance increase as the water supply increases with a nearly constant K-factor. If the flow is not hitting the target and you need to boost the distance, simply increase the water supply (increase pump engine throttle). Once the flow rate reaches the set point, it performs as a conventional fixed flow nozzle. There is no need to shut down operations to adjust flow unless you need more beyond the set point. This mode is desirable for foam proportioning operations on storage tank fires or other hazards requiring specific application densities.

Hydro-Foam Proportioning – The Ambassador nozzle is capable of Hydro-Foam proportioning at flow rates up to 6000 GPM at 1% or 3% and at 3000 GPM at 6% using remote jet pump technology for easy and efficient foam application.  Jet pumps are supplied with the trailer. A “flood-plate” disperses the rich water/foam solution (from the jet pumps) around the inner periphery of the master stream for thorough mixing.

Hydro-Chem™ Capability – The Ambassador nozzle is capable of delivering up to 100 lb (45 Kg)/s of dry chemicals with its dry chemical accessory kit for 3-dimensional or pressure fires. To use the Hydro-Chem™ capability, feed the foam solution to the trailer unit via the water inlet connections from other foam systems such as Williams WATP and/or Hot Shot foam systems. The Hydro-Foam flood plate can be easily removed by hand and replaced with a chemical extension tube. This tube can be fitted with your choice of dry chemical choke tips that allow the dry chemical flow rate at 25, 50, 75, or 100 lb/s.

The Hydro-Chem™ option allows the dry chemical, such as Williams Fire & Hazard Control (WF&HC) PKW, to be propelled inside the protective “tunnel” of the master stream. This enables the dry chemical to reach a greater distance than is possible with conventional equipment. Dry chemical manifolds are available for interconnecting WF&HC Gorilla 500 LB PKW units or common wheeled dry chemical units to produce the required flow.

Highly Efficient Waterway - The trailer has a large integrated stainless steel waterway and inlet manifold with standard Storz couplings. Various combinations of inlet sizes are available for maximum connectivity. The monitor waterway has 8” (200 mm) full-flow construction to provide minimum friction loss and maximum efficiency. The nozzle features a hard coat anodized aluminium and stainless steel assembly. Constructed of stainless steel, the monitor is designed to provide years of reliable service.

User-friendly Operations – The nozzle provides easy pattern control, ranging from full fog for personnel protection to straight stream for maximum reach and delivery (via a full wrap-around handle attached to the outer sleeve.) The monitor allows a full monitor articulation of 360˚ rotation, and down to -10˚ and up to +80˚ vertical travel for the tiller bar models. The trailer features an approximately 400 gallon (1,500 L) ballast for stability to counteract the reactionary force generated by the large flow. The ballast is below an anti-skid grip deck for firm footing, even when the surface is completely wet. Flowing up to 6,000 GPM, a firefighter operating the device using the standard tiller-bar will experience the freedom of smooth, rapid horizontal and vertical movement. For enhanced safety and ease of use, an electric/hydraulic version is also available, which can be remotely controlled from up to 300 ft (91 m) away and with gear operation as backup. The remote-controlled unit is fully self-contained and requires no additional power supply.

For even higher flow rates, WF&HC also provides an 8,000 GPM (30,000 LPM) model.  Customization, including non-standard inlet manifolds, is available upon request.

Product Image
Ambassador Monitor Trailers