Skip to main content
[email protected] WFR is a wholesale distributor for the Canadian emergency services and does not sell to the public

Fire Pump 13.5hp Frontier Bushfighter Medium Pressure w/ B&S engine

485030205 (PFP-20HPHND-2D) 4" inlet
https://www.wfrfire.com/web/image/product.template/208/image_1920?unique=7be15cc

Manual & Electric Start

    This combination does not exist.

    This is a compact pump that delivers amazing pressure and flow performance for its small size. Comes with electric start and battery installed. Perfect for wildland applications.

    Engine Specifications

    • B&S 13.5 hp at 3,600 RPM air cooled engine
    • Single cylinder gasoline engine
    • Manual and electric recoil start
    • 1.5 gallon (5.7 L) integrated fuel tank
    • Battery

    Pump Unit Specifications

    • Dual stage centrifugal pump
    • Pump body made from aluminum
    • Aluminum impeller
    • Mechanical shaft seal
    • One 2.5" (65 mm) NPT delivery outlet and (2) 1.5" (38mm) NPSH delivery outlets (note: must order 65mm discharge threads if other than NPT)
    • One 3" (77 mm) NPT male suction inlet (PLEASE ORDER THE ADAPTER WITH THE THREADS YOU NEED)
    • Dimensions (approx.): 19.5"l x 15.25"w x 17"h (495 mm x 385 mm x 430 mm)
    • Weight (approx.): 66 lbs. (30kg)

    PERFORMANCE

    • 230 gpm @  0 psi
    • 158 gpm @ 30 psi
    • 140 gpm @ 45 psi
    • 125 gpm @ 60 psi
    • 105 gpm @ 70 psi
    • 80 gpm @ 80 psi
    • 55 gpm @ 100 psi
    • 30 gpm @ 105 psi
    • 0 gpm @ 115 psi

    Priming:

    These are centrifugal pumps and so do not self prime. There is a cap on the top of the manifold that can be removed to fill with water and the pump cavity will hold the water due to the check valve built into the inlet side of the pump. It is also advised to use a suction hose equipped with a foot valve strainer. This allows you to pump the hose and strainer in the water to force water to the pump, so by keeping one discharge valve open while you do this you will be alerted when the water comes out of the valve it is primed and you can close the valve. It is at this point you can start the pump. DO NOT RUN THE PUMP DRY as you can burn it out in about 4 to 5 minutes from overheating. If you are not flowing water do not leave the pump running without a slow bleed of water from an outlet to prevent the water inside the pump for overheating. 

    Product Image
    Fire Pump 13.5hp Frontier Bushfighter Medium Pressure w/ B&S engine