The TankVision is the ultimate solution in tank volume monitoring. It uses a pressure sensor to sense the amount of liquid in the tank and can be calibrated to accurately display the volume in tanks of all shapes and sizes. The TankVision is available for water, class A, and class B foam tanks with each display having a distinctive color and style. A single master display can be connected to an unlimited number of color coded, full size remotes using the FRC datalink.
Ultra-brite with 180° visibility.
The nine super bright LEDs mount behind a unique wide view lens that allows the
display to be visible and clearly read from all line-of-sight angles for a full
180 degrees.
Features
- Highly Visible Wide-View Lens
- Ultra-Brite LEDs display exact water/foam remaining in tank
- Flashing Warning when actual volume is below 25%
- Down-Chasing LEDs alert operator when tank is almost empty
- Visual Warning at low volumes
- Self-Calibrating for any size or shape tank
- Uses pressure sensor (no tank probe to size and maintain)
- Self Diagnostic capabilities
- FRC Datalink allows for unlimited displays
- Cab Miniature display and Remote Light Driver available
- Rugged Waterproof cast aluminum housing
- Easy to Operate and Install
The TankVision uses a pressure sensor that is mounted near the bottom of the
tank. The sensor has a standard 1/4 inch NPT fitting. Foam tanks require that
the FRC foam tank vent (provided with the foam display) is installed. This is a
custom pressure/vacuum vent that will open with less than 0.01 PSI difference
between the inside and outside of the tank.
