Single Auto Charge Battery System

Single Auto Charge Battery

Deluxe Single Battery System-Model 091-56-12

Automatically charges battery
Designed specifically for single battery vehicles
18 amps total output
Built-in 3 amp battery saver
No water boil off
Rugged construction for vehicle mounting
Remote bar graph indicator

The Auto Charge 1000 is a high output automatic battery charger. Unique electronic sensing circuits sense the true battery voltage while eliminating the need for external sense wires. Charging is completely automatic. The maximum output of the charger is 15 amperes. When the battery is fully charged, all charging stops. There is no overcharging and no water boil off.

A common problem with electrical systems is the loading on the battery caused by rechargeable hand lights, portable radios and other loads. The Auto Charge 1000 handles these loads with a built-in “BATTERY SAVER”. Auxiliary electrical loads are connected to the Battery Saver output. During normal vehicle operation these auxiliary loads are connected to the battery. When the vehicle is plugged in to A.C. power, the auxiliary loads are automatically removed from the battery and powered from the "BATTERY SAVER" circuit. A maximum of 3 amperes is available from the "BATTERY SAVER". An automatic overload protector limits the 3 ampere output. A yellow overload indicator is illuminated whenever the "BATTERY SAVER" output limit is exceeded.

The Auto Charge 1000 indicator may be mounted remotely from the charger assembly. Connected by 3 wires to the charger, the indicator contains a bar graph display. The display indicates the “state of charge” and the general condition of the battery. An old or defective battery is displayed as a low reading which remains low after an extended charging period. A discharged battery also is indicated by a low reading. Precise indications of battery condition appear, independent of the distance between the charger and the display.

SPECIFICATIONS:
Input: 120 volt, 50/60 Hz, 3.5 amperes
Charger Output: 12 Volts, D.C., Output Current: 15 amperes maximum
Voltage Sense: Remote, electronic, no sense wires required
Battery Saver: Output Voltage: 12 Volts D.C., Output Current: 3 amperes maximum
Power Indicator: Indicates input power applied.
Battery Saver Overload Indicator: Indicates Battery Saver load exceeds 3 amperes.
Charger Output Indicator: Remotely located bar graph display, indicates state of charge and condition of battery.
Warranty: 3 Years

Part #654547100

Instruction Manual

Back to Top