Piston Intake Relief Valve

STORZ

Piston Intake Relief Valve

This piston valve is made of light weight aluminum alloy and is hard anodized to fight corrosion problems created by stagnant water. This valve is complete with a 30 degree built in elbow permitting smoother water flow. The adjustable pressure relief valve is factory set at 100 psi and labeled with valve settings for your convenience. The retractable knob on the hand wheel is supplied with a stainless housing to avoid quick seizing. It is also supplied with an air bleed off.. The valve permits safe controlled flow to the intake pump and can also be used to draft. It is available with storz or threaded combination and needs only 9 easy turns to open and close.

Valve body constructed of high strength aluminum alloy
Hard coat anodized finish and electro-painting throughout--minimum thickness .001".
280 psi working pressure without relief valve, 425 psi test pressure, 750 psi minimum burst pressure
4.5"(114mm) waterway
Double spring, cartridge type, adjustable from 50 to 200 psi.
Available in 4"(102mm), 5"(127mm) Storz x 4"(102mm)-6"(152mm) female swivel threaded inlets

Part #	Description	Weight	Dimensions
			Width	Height	Length
583010100	4" Storz to 4" Female Swivel	25 lb.	8.0"	17"	12"
583010102	4" Storz to 4.5" Female Swivel	25 lb.	8.0"	17"	12"
583010110	4" Storz to 5" Female Swivel	24 lb.	8.0"	17"	12"
583010120	4" Storz to 6" Female Swivel	24 lb.	8.0"	17"	12"
583010125	5" Storz to 4" Female Swivel	25.5 lb.	8.0"	17"	12"
583010130	5" Storz to 4.5" Female Swivel	25.5 lb.	8.0"	17"	12"
583010140	5" Storz to 5" Female Swivel	24.5 lb.	8.0"	17"	12"
583010150	5" Storz to 6" Female Swivel	24.5 lb.	8.0"	17"	12"

All measurements include handles.

Back to Top