Storz Gate Valve--30º Elbow

STORZ

Gate Valve with 30º Elbow

Gated Relief Valve Permits safe controlled flow to the intake pump and can also be used to draft. It is made of lightweight aluminum alloy and is hard anodized to fight corrosion problems created by stagnant water. This valve can be used on the suction intake and discharge sides of a pumper. It is complete with a Pressure Relief Valve, non-rising stem, 30° Elbow and 1/4” air bleed off. The handwheel is supplied with a durable plastic knob to fight against corrosion. The pressure relief valve can be mounted in three different positions for discharge purposes.

280 psi working pressure, 425 psi test pressure,
4"(102mm) waterway
Available in 4"(102mm), 5"(127mm) Storz x 4"(102mm)-6"(152mm) female swivel threaded inlets

Part #	Description	Weight	Dimensions
			Width	Height	Length
582620100	4" Storz to 4" Female Swivel	29 lb.	15"	14"	10.5"
582620105	4" Storz to 4.5" Female Swivel	29 lb.	15"	14"	11.5"
582620110	4" Storz to 5" Female Swivel	30 lb.	15"	14"	11.5"
582620115	4" Storz to 6" Female Swivel	30 lb.	15"	14"	11.5"
582620120	5" Storz to 4" Female Swivel	30 lb.	15"	14"	10.5"
582620125	5" Storz to 4.5" Female Swivel	30 lb.	15"	14"	11.5"
582620130	5" Storz to 5" Female Swivel	31 lb.	15"	14"	11.5"
582620135	5" Storz to 6" Female Swivel	32 lb.	15"	14"	11.5"

All measurements include handles.

Back to Top