Storz Gate Valve

STORZ

Gate Valve

The Gate Valve is made of lightweight aluminum alloy and is hard anodized to fight corrosion problems created by stagnant water. This valve can be used on the suction intake and discharge sides of a pumper or on a fire hydrant. It is complete with a non-rising stem and 1/4" air bleed off. The handwheel is supplied with a durable plastic knob to fight against corrosion. Needs only 8 easy turns to open and close.

280 psi working pressure, 425 psi test pressure, 750 psi minimum burst pressure
4.5"(114mm) maximum waterway
Available in 4"(102mm), 5"(127mm) Storz x 4"(102mm)-6"(152mm) female swivel threaded inlets

Part #	Description	Weight	Dimensions
			Width	Height	Length
582610100	4" Storz to 4" Female Swivel	18.5 lb.	6"	19.5"	9"
582610120	4" Storz to 4.5" Female Swivel	18.5 lb.	6.5"	19.5"	9"
582610140	4" Storz to 5" Female Swivel	18.5 lb.	7"	19.5"	9"
582610160	4" Storz to 6" Female Swivel	19 lb.	8"	19.5"	9"
582612100	5" Storz to 4" Female Swivel	20 lb.	6"	19.5"	9"
582612120	5" Storz to 4.5" Female Swivel	20 lb.	6.5"	19.5"	9"
582612140	5" Storz to 5" Female Swivel	20 lb.	7"	19.5"	9"
582612160	5" Storz to 6" Female Swivel	21 lb.	8"	19.5"	9"

All measurements include handles.

Back to Top