|
Specifications
Pump
Type: Portable supply.
Frame: Integral welded steel tubing.
Suction Connection: 3 inch NPT female, 4 inch Victaulilc.
Discharge Connection: Aluminum, 2-1/2 inch NST male NST screw gate valve. Swivels 175 degrees for ease of hose layout.
NOTE: Suction and discharge connection thread sizes for standard unit. Consult WFR for a full range of factory installed adapters to meet individual user needs.
Body and Volute: Aluminum.
Impeller: 8 inches (203.2 mm) Silicon Bronze.
Pump Shaft: Engine shaft with bronze sleeve.
Priming: Exhaust Venturi; 20 inches (508 mm) HG.
Maximum Flow: 400 GPM (1514 LPM) @ 20 PSI (1.5 BAR).
Maximum Pressure: 120 PSI (8 BAR).
Weight: 175 pounds (79 KG).
Length: Handles Extended: 35-1/8 inches (892 mm).
Handles Folded: 25-3/8 inches (645 mm).
Width: Handles Extended: 27-1/2 inches (698.5 mm).
Handles Folded: 19-5/8 inches (498.5 mm).
Height: 22-5/8 inches (574.5 mm).
Instrumentation
-Throttle level.
-Priming lever.
-Master On/Off Switch.
-Start Push-Button.
-Choke Control.
-Low Oil Pressure Warning Light.
Suction Gauge: 2-1/2 inches (64 mm) Dia. Glycerine filled, 30 inches HG. Vac to 150 PSI (-1 to 10 BAR).
Discharge Gauge: 2-1/2 inches (64 mm) Dia. Glycerine filled, 0 to 400 PSI (0 to 28 BAR).
Options
-Suction Adapters
-Discharge Adapters
-Lightmast & Socket
-Hour meter
-Trickle Charger
-TRV120-P Thermal Relief Valve for portable pumps
-Protective pump coating for seawater applications
ENGINE (Battery Included)
Make: Briggs and Stratton Vanguard™
Model: 350400 Series.
Type: Horizontal shaft, air cooled, V-twin OHV.
Horsepower: 18 BHP (13.4. kW) at 4000 RPM.
Torque: 30 foot pound (40.7 N-M). Maximum stroke at 2600 RPM.
Bore x Stroke: 2.83 x 2-3/4 inches (72 x 77 mm).
Displacement: 34-3/4 cubic inches (570 cc).
Oil Capacity: 3.0 pint (1.4 liter).
Fuel Tank: Cross linked Polyethylene.
Fuel Capacity: 3 gallons (12 liters) 2 hours running time.
Electrical:16 AMP alternator.
Emissions: Meets 1994 California Air Resources Board Standards. |
