The Fyr Flote is a lightweight, portable centrifugal pump mounted on an unsinkable, high-strength polyethylene float with dual carrying handles and a splash suppression collar. A high-volume model (20FV-C8) and a high-pressure model (20FP-C8) meet most every pump need — in as little as four inches of water. Weighing just 49 pounds, the Fyr Flote stores easily in most truck compartments. It includes an automatic recoil starter, a spark arresting muffler, and an engine overspeed control switch.

PUMP
Type: Centrifugal, bolted to engine.
Suction: Two inch, non-threaded, with easily removable oversized screen.
Discharge: One and half inch NST male.
Head: Lightweight, high strength, corrosion resistant aluminum alloy.
Volute: High strength aluminum alloy with machined waterways for maximum performance.
Impeller: Bronze enclosed type for maximum efficiency.
Clearance Rings: Patented floating bronze clearance ring for minimum clearance, to prevent rubbing, seizing, and alignment problems.
Pump Shaft: Engine's vertical shaft serves as pump shaft, protected against corrosion by a bronze sleeve.
Shaft Seal: Self-adjusting, self-lubricated using a special ceramic seat for wear and shock resistance.
Priming: Exclusive auto prime system works without a suction hose.

ENGINE
Make: U. S. Motor Power Inc.
Type: Single cylinder, two-cycle gasoline.
Horsepower: 8 HP at 7,000 RPM.
Cooling: Forced air.
Starting: Water-resistant, solid state ignition.
Air Filter: Wire mesh element protects against impurities.
Fuel Filter: 75 micron in-line fuel filter; a fuel strainer is built in to the fuel pump.

OPTIONS
-Stowaway Accessory Package
-100 feet x 1-1/2 inch hose, adjustable nozzle, tune-up kit, and one quart N.M.M.A (BIA) approved 2-cycle engine oil in canvas bag.

DIMENSIONS
Length: 28.25 inches (718 mm)
Width: 20 inches (508 mm)
Height: 16 inches (406 mm)
Weight: 49 pounds (22 kg)

Ordering Part Numbers
20FV-C8: 545-2121-00-0
20FP-C8: 545-2131-00-0

Back to Top

Copyright © WFR Wholesale Fire & Rescue Ltd.