This is a high quality design diesel powered pump. The pump gives over 400 gpm (1514 lpm) and goes up to 100 psi (6.9 bar). Engine and pump are mounted on a protective frame made of steel with a shock absorber and folding handles. Also available with skid frame.
- Yanmar 10 hp at 3600 rpm, air cooled diesel engine.
- Single cylinder diesel engine.
- 12 volt electric start with recoil start as backup.
- 1.45 gallons (5.5 litres) integrated fuel tank.
Pump Unit Specifications:
- Direct drive CET single stage centrifugal pump.
- Pump body made from resistant aluminum alloy with bronze impeller.
- Mechanical shaft seal.
- One 2½"(65mm) delivery outlet with 1/4 turn ball valve
- One 3" (77mm) suction inlet
- Exhaust priming system guaranteed up to 20 ft. (6 meters) lift.
- Dimensions: Length 20½"(520mm)/ Width 25⅞"(657mm); Height 24⅝"(625mm)
- Weight: 190 lbs(86kg)
- 400 gpm (US); 1514 lpm @ 10 psi(.69 bar)
- 340 gpm (US); 1287 lpm @ 25psi(1.73 bar)
- 205 gpm (US); 776 lpm @ 50 psi(3.45 bar)
- 110 gpm (US); 416 lpm @ 75 psi(5.18 bar)
- 50 gpm (US); 189 lpm @ 90 psi(6.21 bar)
Accessories:
- Swivel spotlight
- 12 volt battery
- 100 watt alternator
- Pressure gauge
- Vernier throttle
Part #485020100
