Wick F200-10S Fire Pump

PUMPS

Wick F200-10S™ Fire Pump

Advancements in forest fire fighting techniques have demanded pumps that provide higher flows and high pressures. This requirement has resulted in the Wick F200-10S pump unit. Powered by a proven Solo 210 cc two stroke engine with Nikasil treated cylinder walls & solid state CD ignition, this pump provides the best performance to weight of all pumps in it's category. Some important features include user friendliness and very easy pull starting, a low tone muffler which significantly reduces noise, a two stage detachable pump end with a reliable stainless steel pump attaching clamp.

A detachable rewind starter for emergency rope start, a patented electronic over-speed protection cut-out switch. All pump components are stainless, brass, or anodized aluminum to withstand the rigors of long term use. This portable pump is used where long hose lays, high pressure, and high performance are required. Optional U.S.D.A approved spark arrestor & optional muffler heat shield also available.

Dimensions

Length: 22.75" (57.8cm)

Width: 14.25" (36.2cm)

Height: 14.5" (36.8cm)

Weight: 51 lbs (23.1kg)

Suction: 2" NPSH (50mm)

Discharge: 1½" NPSH (38mm)

Engine

Type: Solo two cycle air cooled 210cc

Horsepower: 10 HP

Fuel Mixture: 24:1

Cylinder: Nikasil

Patented electronic over-speed protection cut-out switch

Mercury style fuel quick-connect

Peak Performance

Discharge (PSI) 0 25 50 125 155 185 217

Discharge (KPA) 0 172 345 862 1035 1275 1495

US Gal per min. 140 130 118 80 50 25 N/A

Litres per min. 530 492 446 303 189 94.5 N/A

Peak Performance
Discharge (PSI)	0	25	50	125	155	185	217
Discharge (KPA)	0	172	345	862	1035	1275	1495
US Gal per min.	140	130	118	80	50	25	N/A
Litres per min.	530	492	446	303	189	94.5	N/A