PUMPS
PFP-67hpVW-2D
This high pressure/high volume pump is made to fight fire or supply water to the fire scene. Engine and pump are mounted on a portable skid chassis.

Most portable fire pumps can be shipped with full frame , with half frame, or with skid frame.

Engine Specifications:
  • Volkswagen 67 hp at 4000 RPM, water cooled with internal system
  • 4-cylinder gasoline engine
  • 12 volt electric start
  • 6 gallons (22 l) capacity fuel tank, sufficient for 2 hours continuous operation approx., made of plastic, with filling neck and lid

Pump Unit Specifications:

  • CET is using new technology of a two stage centrifugal pump
  • Pump body made from resistant aluminum alloy
  • Bronze impeller, mechanical shaft seal, stainless steel pump shaft
  • Electric priming system, guaranteed up to 20' (6 meters) lift
  •  Two 2½" (65mm) delivery outlets
  • One 4" (100 mm) suction inlet
  • Dimensions 49¼"(1250mm)Lx35¾"(908mm)Wx32"(812mm)H
  • Weight: 650 lbs (295kg)
  • Heavy duty handles and wheels optional
Performance
  • 675 gpm(US); 562(Imp); 2555 lpm @ 50 psi(3.45 bar)
  • 600 gpm(US); 500(Imp); 2271 lpm @ 100 psi(6.90 bar)
  • 400 gpm(US); 333(Imp); 1514 lpm @ 150 psi(10.34 bar)
  • 250 gpm(US); 208(Imp); 946 lpm @ 175 psi(12.07 bar)
  • 100 gpm(US); 83(Imp); 378 lpm) @ 200 psi (13.79 bar)

Control Panel

  • Engine start/stop button
  • Throttle control lever
  • Choke control lever
  • Oil control gauge
  • Operating panel light
  • Pressure gauge
  • Vacuum pressure gauge

Warranty:
Engine manufacturer's warranty is two years and can be worked on by any local dealer. WFR and CET warrants to replace any defective part of the pump for one year. Warranty does not obligate us to cover labour or transportation charges.

Back to Top
Click here to go to WFR's Home Page Copyright © WFR Wholesale Fire & Rescue Ltd.