PIERCING NOZZLES
Original Flamefighter
Every fire station should have at least one. Crafted from the finest steel and chrome, this unit comes equipped with a 1½"(38mm) NST hose connection. Other threads are also available. The FlameFighter provides fast, safe fire extinguishing for most structures. Weight is 36 lbs, length 60". Your FlameFighter unit is warranted against defects in workmanship for a full 5 years.

Part #461610100

 
Hand-Held Flamefighter

 
The latest in firefighting equipment, this unit lets you determine the best length for getting at normally inaccessible areas. Modular sections from 2'(.6m) to 6'(1.8m) give you total extensions of 6'(1.8m), 8'(2.4m), 12'(3.7m) or longer. Manufactured of the highest quality steels and aluminum.

Part #461615110

HOUSES: The FlameFighter provides quick and efficient access through roofs, doors, walls, floors and even foundation block to extinguish fires from attic to basement.

CARS AND TRUCKS: For fires in the engine, passenger or trunk compartment, the FlameFighter easily pierces the hood, door or trunk to make quick work of a vehicle fire. FlameFighter's effectiveness often saves vehicles from total loss.

BODY SHOPS/GARAGES: In any structure housing combustibles or dangerous chemicals, the FlameFighter need only be lodged into a wall, door or roof and left unattended to do its work. A much safer method of handling these dangerous areas.

MOBILE HOMES: Among the most difficult because of the extreme heat, these fires can be effectively fought from outside with the FlameFighter. The device easily pierces most any desired point of entry.

SAVES VALUABLE TIME: From simple to hard-to-reach fires, the FlameFighter gets you to the source of a fire quickly. In just seconds, one or two firefighters can insert the FlameFighter into virtually any desired entry point and generate a high pressure water spray covering up to 2,400 square feet. FlameFighter eliminates the time spent using axes, saws and other cumbersome equipment--time which can make all the difference in reducing danger and bringing a fire under control.

WORKS WITH WATER OR FOAM: Whether a blaze is being fought with water or foam, the precisely placed openings in the nozzle send out a pressurized spray that extinguishes or cools most any fire.

NO BACK PRESSURE, REDUCES OXYGEN ENTRY: The FlameFighter's powerful spray generates virtually no back pressure--it can be left unattended without worry of movement or slippage, even at 250 psi delivering 276 gpm. The FlameFighter creates only a 2 3/8" hole at the entry point, virtually eliminating oxygen entry from outside sources.

 

Specifications
GPM Hose Size
PSI 1½" 38mm 1¾" 45mm 2½" 64mm
100 176 666 190 719 250 946
125 195 738 215 813 275 1040
150 212 802 240 908 320 1211
175 226 855 260 984

200 241 912 280 1059

225 257 972



250 276 1044



Back to Top
Click here to go to WFR's Home Page Copyright © WFR Wholesale Fire & Rescue Ltd.