|
 |
The Twister 1" Series is available in ¾" or 1" threads. The
Twister is a selectable, dual gallonage fog nozzle with two flow settings of
either 10 and 24 GPM or 10 and 40 GPM. Designed for simplicity and durability.
The rubber bumper gives good grip and protects the front end. Twisting the
shaper from the off position produces the following settings: low flow stream,
low flow narrow fog, high flow stream, then high flow fog. The Twister is a
rugged, economical nozzle. All lightweight materials, hardcoat anodized
aluminum. Quick-change rear valve seat, stainless steel shut-off ball and a
twist "off" position for positive shut off. Pistol grip is mounted
below the valve. Optional coloured pistol grips. Accepts the FJ-MX-D
FOAMJET multi-expansion foam aspirating attachment. |
Part #465010100 C1024: ¾" GHT, 10 & 24 GPM, Tip Only (.4 lbs., 4")
Part #465010110 D1024: 1", 10 & 24 GPM, Tip Only (.4 lbs., 4")
Part #465010120 DS1024: 1", 10 & 24 GPM, Ball Valve (1½ lbs., 6¼")
Part #465010130 DS1024P: 1", 10 & 24 GPM, Ball Valve with Pistol Grip (1.9 lbs., 6¼")
Part #465010135 D1040: 1", 10 & 40 GPM, Tip Only (.4 lbs., 4")
Part #465010140 DS1040: 1", 10 & 40 GPM, Ball Valve (1½ lbs., 6¼")
Part #465010145 DS1040P: 1", 10 & 40 GPM, Ball Valve with Pistol Grip (1.9 lbs., 6¼")
Flow Chart
Parts Diagram
Manual (200KB PDF)
Service Procedure (210KB PDF)
|
