| The Thunderfog 250 Series has five flow settings of 95, 125, 150, 200, and 250 GPM @ 100 PSI. For higher flows, the 250 series will work with 1½" through 2½" lines. The Thunderfog series is a lightweight, rugged and dependable choice in selectable gallonage nozzles. All lightweight materials, hardcoat anodized aluminum. Flush without shutting down. Quick-change rear valve seat and stainless steel shut-off ball. Pistol grip is mounted below the valve. All Thunderfogs are available with uniquely cut fixed fog teeth or stainless steel spinning teeth. Optional coloured pistol grips. Accepts the FJ-MX-FT FOAMJET multi-expansion foam aspirating attachment. | |
|
Part #465034090 1½" thread, Tip Only
with Spinning Teeth (3.6 lbs., 8 ¼") |
|
Model Tested
Thunderfog Part #465034110
Selectable gallonage nozzle with 5 flow settings of 95, 125, 150, 200 and
250 gpm at 75 psi nozzle inlet pressure.

Model Tested
Thunderfog Part #465034110
Selectable gallonage nozzle with 5 flow settings of 95, 125, 150, 200 and
250 gpm at 100 psi nozzle inlet pressure.

Model Tested
Thunderfog Part #465034110
Selectable gallonage nozzle with 5 flow settings of 95, 125, 150, 200 and
250 gpm at 125 psi nozzle inlet pressure.

| NOTE: Stream trajectories shown are for no wind conditions at 30 degree elevation. Wind can substantially alter the shape and reach of the stream of any nozzle. Effective firefighting range of nozzles is shown. Maximum reach of last water drop is approximately 10% farther. |
Parts Diagram
Instruction Manual
![]() |
Copyright © WFR Wholesale Fire & Rescue Ltd. |