MD12A MAX-FORCE
Dual Automatic pressure control with a flow capacity of 175-500 GPM. The nozzle may be switched between standard 100 PSI and a low pressure mode by twisting a knob on the front of the nozzle. The built-in halo ring adjusts the pattern from straight stream to a 120 degree wide fog. Further rotation opens the nozzle to flush 3/8" debris without shutting down. Hard anodized aluminum with rubber bumper. Standard inlet is 2.5" NH. Weight 6.7 lbs. (3 kg); Length 8.8" (223 mm)Part #441214100
MD18A MAX-MATIC
Automatic pressure control with a flow capacity of 100-500 GPM. The nozzle operates at a standard 100 PSI. The built-in halo ring adjusts the pattern from straight stream to a 120 degree wide fog. Further rotation opens the nozzle to flush 3/8" debris without shutting down. Hard anodized aluminum with rubber bumper. Standard inlet is 2.5" NH. Weight 6.7 lbs. (3 kg); Length 8.8" (223 mm)Part #441214110
MD17A MAX-MATIC
Automatic pressure control with a flow capacity of 100-500 GPM. The nozzle operates at a Low Pressure of 80 PSI. The built-in halo ring adjusts the pattern from straight stream to a 120 degree wide fog. Further rotation opens the nozzle to flush 3/8" debris without shutting down. Hard anodized aluminum with rubber bumper. Standard inlet is 2.5" NH. Weight 6.7 lbs. (3 kg) Length 8.8" (223 mm)Part #441214115
MD14A MAX-FLOW
500 GPM @ 100 PSI Fixed Gallonage. The fixed orifice tip is ideal for high rise attack when pressure fluctuations can be extreme. The nozzle will operate with pressures as low as 30 PSI. The built-in halo ring adjusts the pattern from straight stream to a 120 degree wide fog. Further rotation opens the nozzle to flush 3/8” debris without shutting down. Hard anodized aluminum with rubber bumper. Standard inlet is 2.5”NH. Weight 6.5 lbs. (2.9 kg) Length 9" (229 cm)Part #441214120
