Home Catalogue Contact List Events Calendar HotShots Related Links Trucks

MSDS

INDEX

DSL-100 All Synthetic Compressor Oil

1. PRODUCT IDENTIFICATION

   
Trade Name: DSL-100
Company Information:: Summit Industrial Products Inc.
9010 County Road 2120
Tyler, TX 75707
Phone: (903)534-8021
Fax: (903) 581-4376
Emergency number: CHEMTREC 1-800-424-9300

2. HAZARDS INDENTIFICATION

 
Properties Affecting Health:None
Principle Routes of Exposure:None
Skin Contact:Substance does not generally irritate and is only mildly irritating to the skin.
Eye Contact:Avoid contact with eyes. May cause slight irritation.
Inhalation:May cause irritation of respiratory tract.
Ingestion:Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea
 

3. FIRST AID MEASURES

   
General advice: Consult a physician
Skin contact: Remove and wash contaminated clothing before re-use. Wash off immediately with soap and plenty of water.
Inhalation: Move to fresh air. If breathing is difficult, give oxygen. Consult a physician.
Eye contact: Flush eye with water for 15 minutes. If symptoms persist, call a physician.
Ingestion: Drink 1 or 2 glasses of water. Do not induce vomiting. Consult a physician if necessary.
 

4. FIRE FIGHTING MEASURES

   
Flash Point: >450°F
   Method: Cleveland Open Cup
Autoignition Temperature: 780°F
Extinguishing Media: Carbon dioxide (CO2), dry chemical,  water spray mist or foam,
Special Firefighting Procedure: In the event of fire, wear self-contained breathing apparatus. Standard procedure for chemical fires.
Specific Hazards: Burning produces irritant fumes.
Unusual Fire Hazard: No hazards to be especially mentioned
Specific Methods: In the event of fire, cool tanks with water spray
 

5. ACCIDENTAL RELEASE MEASURES

   
Personal Precautions: Contaminated surfaces will be extremely slippery. Wear personal protective
equipment.
Environmental Precautions: Should not be released into the environment.
Methods for Cleaning Up: Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container.
 

6. HANDLING AND STORAGE

   
Technical measures/precautions:
Safe Handling Advice:
No special technical protective measures required.
Always replace cap after use. Handle in accordance with good industrial hygiene and safety practice.
Technical Measures/Storage Conditions: Keep containers dry and tightly closed to avoid moisture absorption and contamination.
Incompatible products: No special restrictions on storage with other products.
 

7.  EXPOSURE CONTROLS/PERSONAL PROTECTION

 
Engineering measures to reduce exposure: Ensure adequate ventilation, especially in confined areas.
Respiratory protection: In case of mist, spray or aerosol exposure wear suitable personal respiratory protection and protective suit.
Hand protection: Impervious gloves.
Skin and body protection: Usual safety precautions while handling the product will provide adequate protection against this potential effect.
Eye protection: Safety glasses
Hygiene measures: Avoid contact with skin, eyes and clothing. Wash off with soap and water.
 

8.  PHYSICAL AND CHEMICAL PROPERTIES

 
Physical State: Liquid
Colour: Clear
Specific Gravity:<1.0
Evaporation Rate:Not determined
Vapor Pressure: <0.035 mm Hg @ 300°F
Appearance:Liquid
Odor:Mild
Boiling Point/Range:>600°F
Vapor Density:Not determined
Solubility:Insoluble
 

9.   STABILITY AND REACTIVITY

   
Stablility: Stable
Polymerization: Hazardous polymerisation does not occur.
Hazardous Decomposition Products: Smoke Carbon Oxides
Materials to avoid: Strong oxidizing agents.
Conditions to Avoid: Stable at normal conditions
 

10.  TOXICOLOGICAL INFORMATION

   
Acute Toxicity: No data available
 

11.  ECOLOGICAL INFORMATION

   
Mobility:
Bioaccumulative potential:
Ecotoxicity effects:
Aquatic toxicity:
No information available.
No information available.
No data available.
No information available.
 

12.  DISPOSAL CONSIDERATIONS

 

Waste from residues/unused products: Dispose of according to local and national regulations.

Contaminated Packaging: Empty containers should be taken for local recycling, recovery or waste disposal.
 

13.  TRANSPORT INFORMATION

 

For DOT, TDG (Canada), IMO/IMDG, ICAO, and IATA proper shipping name is not regulated.
 

14.  REGULATORY INFORMATION

 
International Inventories:
  PICCS: This product does not comply with phil
  TSCA: Listed in TSCA
  DSL: All of the components in this product are listed in DSL
  ENCS: This product does not comply w ith JPENCS
  CHINA: This product complies with China
  AICS: All the constituents of this material are listed on the Australian Inventory of Chemical Substances (AICS).
  KECL: This product does not comply with Korea:
  EINECS/ELINCS This product complies with EINECS/ELINCS

U.S. Regulations
Sara (311, 312) hazard class.

Canada
WHMIS hazard class: Non-controlled
 

15.  OTHER INFORMATION

NPCA/HMIS                     NFPA
Health      Slight                         Slight
Flammabaility      Slight                         Slight
Reactivity    Minimal                       Minimal
 

The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.
 

13.  PREPARATION DATE

 
Published:  February 11, 2009     
 

Back to Top

Click here to go to WFR's Home Page
Copyright © WFR Wholesale Fire & Rescue Ltd.