Truck Mount Plate & Bracket
For direct mounting of the portable base on a truck deck. Allows the Crossfire monitor to be uses as a deck gun and can be easily removed for portable use when needed.Part #441230150
Storage Bracket
A 13 gallon, 304 stainless steel bracket with strap holds the Safe-Tak 1250 portable base securely while being transported. This 14¾" x 7¾" x 2"(37cm x 20cm x 5cm) bracket can be mounted vertically or horizontally in any position, including the top or underside of a shelf, on a side wall, or on a compartment door. Weight is 3 lbs.(1.4kg)Part #44123090
Companion Flange
4" NPT, 150 lb. ANSI cast aluminum, gasket included, uses 5/8" bolts (not included)Part #441230140
Truck Mount Adapter
For use on riser with companion flange, or can be screwed directly to taper pipe threads. This compact, hardcoat anodized aluminum adapter allows the Crossfire monitor to be easily utilized as a truck mounted deluge appliance. Hardware and gasket included. 3" ANSI 150# Flange
Part #441230120 3" ANSI 4 bolt flange
Part #441230130 4" ANSI 8 bolt flange
Stream Straightener
Extruded aluminum vanes straighten smooth bore streams to provide greater reach with less turbulence. 2.5" NH inlet and outlet threads. Vane length. 10" or 5".
3 Stacked Tips
These lightweight tips are hard anodized for maximum corrosion protection. Flow charts for each tip are laser engraved. Tip sizes are 1-1/2", 1-1/4", and 1.0" diameter. Small tips may be removed for break and extend operations with a 1.5"NH hose thread. Standard inlet is 2.5"NH.Part #463210110
