Industrial Monitor Model WFR-5000

Specifications for WFR-5000A

Monitor stand shall be sized for a minimum flow rate 1200 USGPM.
Monitor materials shall be of aluminum construction or optional brass.
Base of monitor shall terminate in a 150# flat faced flange complying to ASTM A105 and ANSI B16.5. Flange to be of same material as monitor.
Locking type swivel joints shall provide 360º rotation about a vertical axis and a minimum -45º down inclination and 100º up inclination about a horizontal axis. Swivel joints shall provide a thread operated locking device capable of fixing the monitor orientation in any operation position.
Locking device operation shall be able to be accomplished with gloved hands. No tool or wrench device shall be required to accomplish lock operation.
Swivel joints shall be fitted with pressure nipple type fitting for lubrication. Swivel joint shall be of double seal construction incorporating stainless steel ball bearing joints of leak-proof construction. Swivel joints shall be of non-rusting construction.
Monitor shall be fitted with a removable operating bar complete with knurled handle. Operating bar shall provide a minimum 460mm projection as measured perpendicular to axis of vertical and/or horizontal swivel joint whichever provides the longest bar extension.
Monitor discharge end shall terminate in an aluminum, 2½" Higbee cut type thread with 8 threads to the inch providing a male O.D. of 3.000" and a male root of 2.825". Aluminum station monitor shall be hard anodized for full protection and powder coated for corrosion protection. Colour shall be red.
Optional thread must be specified

Model WFR-5000A (1200 GPM)

Model #	Waterway	Inlet	"A" Dimension
WFR-5000-3A	3"	3" 150# FF Flange	11.86"
WFR-5000-4A	3"	4" 150# FF Flange	12.36"
WFR-5000-3FA	3"	3"-8 NPT Female	9.94"
WFR-5000-3MA	3"	3"-8 NPT Male	10.31"

Back to Top