-
Lightweight Elk-O-Lite construction with hardened steel worm gears
-
Fully enclosed 90° gear cases and totally sealed electric motors for protection from the elements
-
Manual override on both motors
-
Flows up to 2000 GPM through 4.0" vaned waterway
-
Vertical travel is 135° (90° above to 45° below horizontal) with 10 safety stop options to meet NFPA 1901
-
Horizontal travel is 347° with 37 safety stop options to meet NFPA 1901
-
Motors are planetary gear type for maximum torque and minimum power drain
-
Furnished with grease fittings for easy lubrication
-
Complete with 284A stream shaper and SM-1000E combination fog nozzle
-
Inlet 4.0"-150# ANSI flange base • Outlet 3.5" NHT male
-
Finish red urethane enamel
-
Control system includes: One (1) NEMA 4 relay box, one (1) panel mounted switch control module, and one (1) secondary remote control box
-
P.I.C. chip design, electronic circuitry for 12VDC operation with normal 3.25 Amp draw
-
Current limiting motor protection with automatic reset
-
Circuit board moisture protection • Reverse polarity and auxiliary battery backfeed protection
-
Plug and cable prewired into relay box
-
Emergency circuit override capability • Circuit test indicator lights
-
Primary control will override secondary control and has automatic reset
- 3½"(89mm) discharge with 4"(102mm) 125-150# ASA flange base
- Red acrylic/urethane enamel finish
- Width 13¼"(337mm), Depth 18½"(470mm), Height 20"(508mm), Weight 49½ lbs(22.5kg)
