|
|
The Monsoon RC for pumper installations is an electric remote controlled monitor that has all the benefits of the Monsoon Monitor with the addition of powered operation. The Monsoon RC has high flow and low friction loss characteristics and is capable of flowing 2,000 gpm while maintaining a full 450 degree rotational travel. It has greater horizontal sweep angle and uses larger override hand wheels than the RC model for Ladder or Platform installations. Designed for field changeable 12 VDC or 24 VDC volt dc operation. The Monsoon RC comes with a factory installed control panel mounted on the monitor for controlling horizontal rotation, elevation, and nozzle pattern. The motor control circuits are factory installed on the monitor and use position encoders and current limiting to protect the drive train at the ends of travel. Unit comes with 30 feet of ultra-flexing robotics cable already wired to the monitor so installation effort is minimized. Power wire has only four conductors (two for power and two for communications) further easing installation effort. Power wire is enclosed in a unique wire guide that allows 450 degrees of horizontal travel (225 degrees either side of a center position) which is far more reliable than slip rings or coil cords. Large hand wheels for manual override are provided on the horizontal rotation and elevation drive. TFT's MasterStream 2000 ER Nozzle plugs into the factory installed nozzle power wire. Electric drives and control box are waterproof. Main waterway made from hardcoat anodized ANSI 356-T6 aluminum. Silver powder coat finish inside and out. |
|
Part #445020200 | TFT Monsoon Remote Controlled 2,000 gpm monitor with electric actuation |
 |
Copyright © WFR Wholesale Fire & Rescue Ltd. |