|
|
The Hurricane RC is an electric remote controlled monitor, with a single low-profile waterway discharge. The Hurricane RC has high flow and low friction loss characteristics. Capable of flowing 1250 GPM while maintaining a FULL 450 degree rotational travel (225 degrees either side of center). Maximum operating pressure is 200 psi. Field changeable horizontal rotation stops at 45, 90 and 135 degrees either side of center position. Elevation range is 90 degrees above horizontal to 45 degrees below. Designed for field changeable 12 VDC or 24 VDC volt operation, the Hurricane RC comes with a control panel mounted on the monitor for horizontal rotation, elevation, and nozzle pattern. The motor control circuits are factory installed on the monitor and use position encoders and current limiting to protect the drive train at the ends of travel. Unit comes with 30 feet of ultra-flexing robotics power cable already wired to the monitor, and is enclosed in a unique cable guide that allows FULL 450 degrees of horizontal travel which is far more reliable than slip rings or coil cords. Large handwheels for manual override are also provided. TFT’s Master Stream 1250 ER nozzle plugs into the factory installed nozzle power wire. Electric drives and control box are waterproof. A built-in automatic drain protects the monitor from freezing. A threaded port (0.25” NPT) (6mm) is provided for optional pressure gauge. The monitor is made from hardcoat anodized ANSI A356-T6 aluminum and silver powder coat finish inside and out. |
|
Part #445015095 | TFT Hurricane RC monitor, Masterstream 1250 RC nozzle, 18" RC Extend-a-gun with bracket and wired controller |
| Manual (692KB PDF) | |
 |
Copyright © WFR Wholesale Fire & Rescue Ltd. |