Whelen Responder Cadet

LED Traffic Advisor™ Series

Rugged, highly effective Traffic Advisor's improve safety in work zone areas and hazardous roadway or construction applications. Choose from high or low profile models, straight and arrowhead styles, all with more LED's per square inch than any other manufacturer for a higher density, more attention demanding signal. Rotary switch on TACTRL1 and TACTRL3 Control Heads selects left arrow, right arrow, split arrow or alternately operating modes. This Control head also provides eight different programmable sequencing lamp groups via a dip switch. LED status display replicates the lamp groups in action when in operation. LED Traffic Advisors feature a rugged extruded aluminum housing, which is black powder painted. Four 2" slide bolts on models TA56LED, TA58LED, TA1252L and TA1666L provide easy surface mounted installation to the vehicle.

TA652L

Low profile extra thin, six LED lamp groups in flat style housing.

TA852L

Low profile, extra thin, eight LED lamp groups in flat style housing.

TA85LL**

Low profile, extra thin, six LED lamp groups in flat style housing with two end LED flashing warning lamp groups, available in red, amber, blue or green.

TA56LED

High Profile, six lamp groups in "C" style housing.

TA58LED

High profile, eight lamp groups in "C" style housing.

TA1252L

One piece, arrowhead style, twelve 52 Series LED light heads.

TA1652L

One piece, arrowhead style, sixteen 52 Series LED light heads.

TA1664L

One piece, arrowhead style, sixteen 64 Series LED light heads.

TACTRL1A / TACTRL3 Control Head
A four function rotary switch selects: left arrow, right arrow, split arrow or flash operating mode. The dip switch on the rear panel selects the choice of eight sequencing lamp group patterns. A Center/Off rocker switch is used to turn the unit on and off in either high or low intensity mode. An LED status display replicates the lamp groups action when in operation. TACTRL1A for straight style traffic advisors, TACTRL3 for arrow style

8 Available Sequencing Lamp Group Patterns
Straight Style:
One Lamp Sequence to Double Flash; One Lamp Sequence to Triple Flash; Two Lamp Sequence On/Sequence Off; Sequence to Solid; Solid Arrow
Arrow Style:
One Lamp Sequence to Double Flash; One Lamp Sequence to Triple Flash; Solid Arrow 1; Solid Arrow 2; Solid 1/2 Arrow 1; Solid 1/4 Arrow 2; Sequence On/Sequence Off; Sequence to Solid.