- Classic Edge® profile with a slightly wider stance and proven performance features.
- Ultra LC is available in 4,6,8,10 or 12 strobe models
- External cable is small in diameter for easier installation
- Internal electronics allows for 22 guage external wiring for all switching functions
- Low "LC" current operation uses a small diameter external cable wiring harness for operation with standard or low current switch controls or micro switches
- Secondary warning lamp modules available are all strobe, all halogen, all LED; combination: strobe over halogen, strobe over LED, halogen over halogen, LED over LED, and brake/tail/turn
- Modular, Snap-in/Lock-in lamp modules and slide-in lenses are interchangeable and can be placed anywhere on the lightbar.
- Design your own lightbar in your choice of strobe, halogen and LED modules or build in a halogen or LED Traffic Advisor™
- Internal cabling allows complete customization of lightbar, now and in the future.
- End caps with clear lenses are available with colored inner filters for individual color selection, front and rear.
- Filters are also used for color combinations on duplex light modules.
- Strobe Power Supplies provide externally selectble flash patterns using new ScanLock™ (patent pending) momentary selection switching.
- New optional "Personality" module provides enhanced control and added flexibility to the operation of all lamps in the Ultra LC.
- New upgraded Strobe Power Supplies are located on the ends of the lightbar for ease of access and provide 25% more power to each strobe tube.
- All Ultra Lightbars are certified by AMECA to meet SAE Class I and California Title XIII requirements.
- Optional Strap Mounting Kits available for a wide variety of vehicles.
- Three standard lengths: 44 3/8", 49 3/4" and 55" available.
Specifications
Passenger side, 15’ external cable harness includes two (8 gauge) power
cables to the battery, and sixteen low power (22 gauge) function wires
for connection to the customer supplied Switch Control. These low power
function wires need less than 1/2 amp to operate, allow for simple
operational independence of each light bar control function, and make
wiring a snap!
Driver side cable exit with 25’ power cable available.
Installation Instructions
