LIGHTING / VEHICLE
Edge® 9M Series Strobe Lightbar


  • All models meet or exceed SAE Class 1 and California Title XIII requirements.
  • Classic Edge proportions with straightforward, modular construction.
  • Models include 4, 6, 8, 10, or 12 strobe lightheads plus up to ten secondary warning, halogen or LED modules.
  • Optional, built-in Traffic Advisor™  available.
  • Modular design. Lamp modules and lenses are of equal size and can be placed anywhere in the lightbar.
  • End caps with clear lenses and color inner filters allow individual color selection of front and rear strobes.
  • Color filters are also available for duplex light modules.
  • Available with optional Scan-Lock™ flash pattern control (using an external connection) that lets you toggle through ten strobe, halogen and LED flash patterns and lock in the pattern you select. Selected pattern is stored in non-volatile memory until you decide to change. Internal Scan-Lock feature is standard.
  • Scan-Lock allows each power supply and flasher board to be programmed in a different flash pattern.
  • Select up to 3 power supplies (12 strobes max.) and 2 flasher boards per lightbar (8 halogen flashers).
  • Each flasher runs up to 4 lightheads and includes steady burn override for one pair of lights.
  • All non-duplex options are available in kit form, field-upgradeable by distributor, installer or user.
  • Passenger side, 15’ external cable harness, standard on 9M Low “LC” Current lightbars, includes two (8 gauge) power cables to the battery, and sixteen low power (22 gauge) function wires for connection to the customer supplied switch control. These low power function wires need less than 1/2 amp to operate, allow for simple operational independence of each light bar control function, and make wiring a snap!
  • Optional driver side cable exit with 25’ power cable.
  • Three standard lengths: 44”, 50” and 55”.
  • Custom lengths are 60", 66", 72", 77", 82", 88", 93" and 98”.
  • Permanent mount available with a wide variety of gutter mounting options.
  • Size: 3-3/4” (95mm) H x 10” (254mm) W x 44-3/8” (112cm) or 49-3/4” (126cm) or 55-1/8” (140cm).

Installation Instructions
 

Part #402056105
Part #402056110
55" Edge strobe, 1 power supply, (4) corner flashers,  permanent mount kit
55" Edge strobe, 2 power supplies, (4) front flashers, (2) rear flashers, permanent mount kit
Part #402056112 50" Edge strobe, 2 power supplies, (4) front, (4) rear strobes, permanent mount kit
Part #402056113 55" Edge strobe, 3 power supplies, (10) strobes, permanent mount kit
Part #402056114 55" Edge strobe, 3 power supplies, (12) strobes, permanent mount kit

Back to Top
Click here to go to WFR's Home Page Copyright © WFR Wholesale Fire & Rescue Ltd.