- Adjustable for any custom cab apparatus.
- Three or four independent light sources visible at all critical angles.
- More light to the outside of custom cab roofs than conventional linear lightbars.
- Easy colour customization and dome replacement.
- All rotating lights meet SAE J845 and CAC Title 13, Article 22 specifications.
- 3-pod: Length: 20" (51cm); Width: 22.5" (57cm); Height: 5.87" (15cm)
- 4-pod: Length: 26.5" (67cm); Width: 26.5" (67cm); Height: 5.87" (15cm)
Regardless of vehicle size, the two sections can be placed at the outer corners for maximum lighting coverage to all angles – front, sides, and intersections. Each ViewPoint system is configured as a paired unit – a left and a right side – in three-pod or four-pod sections. This design makes a ViewPoint system flexible enough for a variety of fire and ambulance applications. With the system consisting of two sections, a V-shaped lighting system can be formed at any point on the vehicle roof. On aerial or ladder trucks where a conventional linear lightbar won’t fit, a ViewPoint system can be installed around such equipment. Each half of the ViewPoint system is angled at 35° with the lighting pods aligned toward the front of the vehicle. This configuration gives you three critical areas of coverage: Forward – to clear traffic when requesting the right-of-way Intersection – three or four independent light sources are visible at the critical 45° angles Sides – to warn traffic when reaching intersections Typically, these three areas of coverage have required three separate lighting units, creating a strain on vehicle electrical systems. A single ViewPoint lighting system provides the same level of coverage but with a significant reduction in current draw.
Part #402042100 3 pods per side, (2) 95 fpm rotators,
(2) 175 fpm rotators, (2) oscillating lights
Part #402042110 4 pods per side, (2) 95 fpm rotators,
(2) 175 fpm rotators, (2) oscillating lights, (2) traffic clearing lights
