Electrical Connections
- Connect 3 ft. RED wire on switch assembly to 12 volts.
- Connect 8 ft. wire to lamp on driver's side using splice enclosed.
- Connect 12 ft. wire to lamp on passenger side using splice enclosed.
Note: Lights are self-ground, however, if attached to a non-metallic surface, lights must have
a ground wire to operate (not included).
Mechanical Connections
- Connect switch and flasher assembly underneath dash with screws provided.
- Lamps may be mounted by drilling a 1/2" hole for each lamp or by using the optional "L" brackets.
|
