LIGHTING / SCENE

Go Back
Extenda-Lite Portable Hand Lights
Assembly with Mounting Bracket (PLMT)
  1. Unpack the shipping box. Inside you will find an Extenda-Lite Portable Hand Light
  2. Inspect the box and all items inside for damage. Report any damage to the delivering carrier immediately. If there is any damage, save the box and all packing materials.
  3. Unpack the shipping box. Inside you will find an Extenda-Lite PL-Series Portable Hand Light that is totally prewired and ready to mount. PLMT Mounting Bracket is optional and if ordered will be attached to the bottom of the ground base.
  4. The PL-Series Hand Portable Mounting Bracket consists of one (1) PLMT Mounting Bracket. The PLMT Bracket is equipped with a spring loaded, retaining pin that is designed to snap into the hole on the tapered boss that is cast into the bottom of the portable ground tripod base.
  5. Inspect the box and all items inside for damage. Report any damage to the delivering carrier immediately. If there is any damage, save the box and all packing materials.
  6. The PLMT Mounting Bracket can be mounted on any horizontal or vertical surface. Mount it upside down or on the top of any compartment, in what is generally wasted space, or on the sides and back of any compartment giving you more floor space. In selecting the location for your new Portable Hand Light make sure there are no pipes or wiring that will be damaged when mounting holes are drilled. Remember to allow room to reach and pull the spring loaded retaining pin without inferring with anything else in the mounting area.
  7. Make sure the mounting surface is flat. Mark and center punch each of the two (2) hole locations while the bracket is held in place. Drill the two (2) 5/16" holes for the bracket mounting bolts, insert bolts and tighten.

Black wire to circuit breaker's hot side.
White wire to breaker box's neutral bar.
Green wire to breaker box's ground terminals.
Plug = Green to Green; White to Silver; and Black to Brass colored terminal inside of plug.
Make sure all wires are ran in areas that will not be hit or abraded. Use wire ties to hold securely in place.


Back to Top

Click here to go to WFR's Home Page Copyright © WFR Wholesale Fire & Rescue Ltd.