Spill Procedure Instructions
- Empty contents of spill kit on ground.
- If liquids are migrating towards drain use polypropylene cover along with
soil or snow (to weight down edges).
- If tank or drum is leaking, refer to "Plug 'N Dike" instructions
and seal up the leak, or slow it down.
- Encircle spill with socks.
- Toss pads into center of spill and retrieve if saturated.
- Retrieve pads and socks and place in disposal bag.
- Call Environmental or Safety Officer for correct disposal procedures.
Plug 'N Dike Repair Procedure
- Jam ball of Plug 'N Dike into puncture.
- Turn 1/4 turn, applying constant pressure.
- Smooth over edges with extra water.
- If on for extended perids of time, keep moist with water.
Note: This is not a permanent solution, do not use as such
 1 - Hazardous
Materials Disposal Bag with ties
2 - Oil Absorbet Pads
3 - Polypropylene Drain Cover
4 - Pair Nitrile Splash Gloves
5 - Pair Splash Goggles
6 - 10 oz. Jar of Plug 'N Dike Repair Putty
7 - Oil Absorbent Socks
|
