 |
Stainless steel sheet metal screws with neoprene compression seals are used for small size or pinholes, and are especially good for automobile gasoline tanks. Our tubeless tire repair kit works best for leaks on rings or seams of drums. Plug-N-Dike's Plug Pattie (not pictured) included in all universal kits. |
 |
Lead wool is included for fatigue cracks or pinning rim seals along the bottom of drums. Epoxy putty secures permanently, hardening like steel. Hot or cold hose repair tape controls pinhole leaks on any clean surface. |
 |
OSHA approved 200 foot roll of barricade tape to be used in the hazardous area. Bright yellow with black signals warning to your personnel and to bystanders surrounding the area of accidental chemical leaks. 8" x 12" solid neoprene and 28" x 28" foam material to be used where needed. |
 |
Basic tools necessary for working with patches are included with each kit. No need to run for another tool box.
Non-sparking tools are available. Just add "NS". |
 |
Twin "T" design allows for maximum control with stiff stainless plate and neoprene ¾" soft closed cell foam. Quick application with own pre-assembled wing nut/flat fender washer combos and 3 stainless steel
"T" bolts. |
 |
8" x 12" stainless-backed neoprene patch with hardwood cribbing i secured with 2-22' heavy duty nylon straps and ratcheting buckles, allowing for even pressure to be applied to entire area of
patch. |
 |
The "T" bolt crack patches are structured for elongated skin breaks or awkward-shaped gashes. The wide surface areas are faced with a generous ¼" thick neoprene pad. The "T" bolts, as well as the stiff, curved backup plates, are all stainless steel. |
 |
Six assorted surface plugs are used for flat, slightly curved surfaces. The ball plugs are designed to stop a leak in a deeply indented or concave surface where a flat patch would fail. Only the highest quality toggle bolts are used for maximum expansion and grippage on the inside of the container. |
 |
The wooden plugs included in the kit are wedged and pre-shaped. These standard plugs can be covered with an absorbent pad and jammed into a leak, the wood and pad expand together to fit the hole. |
