Electric Blower to inflate or deflate tubular airframes on shelters, cabins, and basins. The Blower comes complete with Y-Hose assembly. Available in 110V or 220V.
Instructions
Related PDF File
Part #273020100
4500 psi high pressure regulator and two 20 ft. supply hoses for inflation of the airframes by way of compressed air from high or low pressure air cylinder.
Part #273020110
Heating system for Airshelters
Part #273020120
Flexible ducting for attaching to heating system.
Part #273020130
Chimney for attaching to heating system. Complete with rain cap/guard.
Part #273020140
One light assembly consisting of two 47 inch florescent bulbs mounted in a fixture with 33 ft. cord assembly.
Part #273020150
Integrated Dual Shower, Basin and Curtain Assembly for Airshelter III or IV. Includes two integrated showers and inflatable basin with removable liner and six curtained privacy areas.
Part #273020210
Two window panels, one on each side of Airshelter. Available for Airshelter III, IV, V, IX. Windows are rectangular 7" x 19" in size. Each window is provided with a fine mesh screen which allows air to cross flow through the shelter, a second clear PVC layer is included to allow light to enter through the windows, however preventing air from entering the window, and a third layer made from the same fabric as the airshelter is provided to cover the window entirely.
Part #273020180
For Airshelter III, IV. Floor is attached to Airshelter via velcro, allowing it to be removed from the Airshelter if necessary. This feature is ideal if the Airshelter is to be used to provide shelter from inclement weather during a trench rescue incident for example.
Part #273020190
Banner can be attached to the Airshelter via velcro. The banner can be screen printed to identify the user or agency or multiple banners can be printed and used to identify the shelter for other purposes.
Part #273020200
Part #273020170
