Ultra Light Foam Bypass Eductor

Ultra-Light Eductor with By-Pass

These foam eductors operate according to the Venturi principle @ 200 PSI. As the pressurized water passes through the tip of the convergent pipe, a suction effect is created and the foam concentrated liquid is drawn up. The apparatus is fitted with a non-return valve with a polyethylene ball valve, which prevents the water from flowing back into the emulsifier
tank. The metering orifice regulates the concentration flow and thus determines the percentage of the foam liquid. Several models are available in different configurations and materials. POK is the only manufacturer that provides a range of portable eductors with extremely low pressure drop. Simple to use and low maintenance.

Small dimensional design 6.25" x 3"
Weight 2.2 lbs.
Stainless steel pick-up tube
By-pass, allowing changing from foam to water without shutting down
Inlet 1.5"; Outlet 1.5"
Note: Each ULTRA-LIGHT eductor come complete with
metering orifices and pick-up tube assembly.

Optional metering device to avoid changing orfices.

Part #221020130 Ultra-Light 60 gpm (200 l/min) metering orifices 0.4%, 1%, 3%, 6%
Part #221025130 Ultra-Light 95 gpm (300 l/min) metering orifices 0.4%, 1%, 3%
Part #221027115 Ultra-Light 125 gpm (400 l/min) metering orifices 0.4%, 1%, 3%
Part #221020140 Metering device 60 gpm (200 l/min) 0.4%, 1%, 3%, 6%
Part #221025140 Metering device 95 gpm (300 l/min) 0.4%, 1%, 3%, 6%
Part #221027120 Metering device 125 gpm (400 l/min) 0.4%, 1%, 3%, 6%

Instructions