| Engine: |
- Kohler 27hp at 3600 rpm, air cooled engine
- 2 cylinder, 4-stroke gas engine
- 12V electric start
|
| Pump: |
- Single stage mid pressure centrifugal pump
- Pump body made from aluminum alloy
- Bronze impeller
- Mechanical shaft seal
|
| Drive system: |
- The water pump works with a direct drive system and the compressor with a
belt drive off the engine crankshaft.
|
| Air compressor: |
- The air compressor is piston type, designed and installed to
supply a minimum of 35 CFM/100 psi
- The unit is designed to pump water only when necessary
|
| Foam proportioner: |
|
| Priming system: |
- air injection priming system guaranteed up to 15' suction lift
|
| Connection: |
- Two 1½" delivery outlets with Akron ¼-turn ball
valve for service line.
- One 1½" delivery outlet with Akron ball valve for
pre-connect hose tray.
- One 1" delivery outlet with ¼-turn ball valve for
fill-in tank.
- One1" delivery outlet with ¼-turn ball valve for hose
reel.
- One 2½" suction inlet tank to pump.
- One 2½" suction inlet.
|
| Measurements: |
- 34" deep x 44" wide x 23½" high (86 x 112 x 60
cm)
- 650 lbs. (295 kg)
|
