FOAMJET-LX The FOAMJET-LX is a lightweight, low expansion foam-making, air-aspirating attachment. Simple, rugged and dependable, the FOAMJET-LX can be quickly attached and provides superior foam-making ability with most modern foam concentrates. When used with AFFF and Class A Foams, the FOAMJET-LX can develop a thick foam blanket which has better extinguishing ability and is longer lasting than foam from non-aspirating nozzles. The FOAMJET-LX can easily be removed in seconds for a water-only or non-aspirated stream. FOAMJET-LX is used in straight stream position only. Part #465613100  FJ-LX-HM--for use with all Mid-Matic or Mid-Force nozzles Part #463266150  FJ-LX-M for use with Master Stream and Master Foam nozzles Part #465610100  FJ-LX-FQ--for use with all QuadraFog 1½" Series and Metro 1 nozzles

 

MX-FOAMJET The MX-FOAMJET is a simple, lightweight multi-expansion foam-making attachment. The MX-FOAMJET allows for a wider selection of foam concentrates to be used, and has the unique ability to vary the expansion ratio and the stream reach of the finished foam. As the nozzle shaper is rotated to the wide fog position (counterclockwise), higher expansion ratios will be produced, but with reduced stream reach. Rotating the nozzle shaper forward to straight stream (clockwise) will produce lower expansion ratios, but with increased stream reach. The ability to regulate the reach and expansion ratio is unique to the MX-FOAMJET. It can be easily removed in seconds for a water-only or non-aspirated stream.

Part #465612100  FJ-MX-D--for use with all Twister 1" Series nozzles Part #465610102  FJ-MX-DQ--for use with all QuadraFog 1" Series nozzles Part #465612102  FJ-MX-F--for use with all Twister 1½" Series nozzles Part #465610106  FJ-MX-FQ--for use with all QuadraFog 1½" Series and Metro 1 nozzles Part #465613105  FJ-MX-HM--for use with Mid-Matic or Mid-Force nozzles Part #465614100  FJ-MX-FT--for use with all ThunderFog 200 and 250 Series and Metro 2 nozzles Part #465615105  FJ-UMX--for use with Ultimatic 125 Series nozzles Part #465611100  FJ-HMX--for use with Handline or Dual-Force nozzles (shown above)

Back to Top

Copyright © WFR Wholesale Fire & Rescue Ltd.