Great combination of comfort, mobility and cost effectiveness

WFR Blaze Spec
[+] View Larger Image

WFR Blaze Gear Spec

This Gear Spec based on Fire-Dex® Ultimate Gear. Ultimate Gear features a coat and pant pattern that focuses on increased mobility and dexterity. It is designed with a firefighter’s needs in mind, allowing for maximum movement without restriction. All Fire-Dex® Gear uses lock-stitch construction on all seams to ensure strong seams that won’t unravel if one stitch is broken.

  • Gold 7.5 oz. Nomex®/Kevlar® outershell
  • Thermal Liner: Nomex® calendared facecloth quilted to Aramid batt
  • Moisture Barrier: Stedair® 3000 on E89
  • Closures: Inner zipper/outer woven hook & loop
  • Black Arashield reinforced cuffs
  • Thermal Liner Inspection Opening
  • TPP: 43.40 cal/cm2 coat; 46.60 cal/cm2 pants
  • THL: 262.80 W/m2 coat; 256.80 W/m2 pants
    Jacket Features
  • 32" jacket with 3" Scotchlite lime/silver triple trim in NYC configuration
  • Combination cargo/handwarmer pockets (8" x 8" x 2")
  • Left chest radio pocket with notched flap (7" x 4" x 2")
  • Survivor flashlight holder with hook on right side
  • Nomex® knitwrist with cotton thumb loop
  • Nomex® webbing postman slide take-up straps on both sides
  • Mic clip 1" x 2" on left side
  • Removable hanging name patch with snaps & velcro (1 row of letters)
  • Throat tab
  • DexFlex Elbow
    Pant Features
  • Mid rise pant
  • Extra snap closure
  • 3" Scotchlite lime/silver triple trim around cuffs
  • Bellows cargo pockets (10" x 10" x 2"), with 6 compartments tool box on right leg, split bellows on left leg
  • External pant front pocket reinforcement of black Arashield
  • SuperDex™ 6-layer padded knee reinforcement black Arashield (10" x 8")
  • Kevlar® belt with thermoplastic buckle
  • DexCuff™ reverse tapered cuff
  • Nomex® webbing with thermoplastic buckle take-up straps
  • 2" Sewn in, red, H-back Suspenders with parachute pull D-ring take up straps
  • 4 tunnel belt loops
  • Available with Internal Pant Harness

Part #142634100  Coat
Part #142634105  Pant

Comfort Features of Ultimate Gear
The new, patent-pending OmniDex Cut has moved the shoulder seams inward to allow the wearer to move with less restriction. The OmniDex Cut has also changed the placement of the sleeve attachment which has eliminated the need for a back pleat, greatly reducing the amount of fabric and weight of the coat. This unique design allows the wearer to move more freely while wearing an SCBA and greatly reduces coat-rise. The elimination of the back pleat has also reduced the number of seams, which helps eliminate irritation under an SCBA and reduces the number of wear-points.

The Removable DRD has an easy access handle that is horizontally positioned for easy grasping and pulling. It can be removed during clean and repair operations reducing the damage to the turnout caused by the Kevlar webbing.

Ergonomic Leg: Entire leg has an angled design to fit in a forward firefighting position that allows freedom of movement that extends beyond the knee.