The Contender custom pumper is a short
wheelbase cab-over design engineered from the frame rails up for
firefighting. The cab features a large windshield for a commanding view
of the road and excellent on-the-scene visibility.
The cab interior is engineered to deliver a open environment with a low
engine tunnel and no cross tunnel between the cab and crew area for more
room and easier en route communication .
The Contender custom pumper now feature a new 152-inch long body style.
This new body is engineered to deliver a full depth compartment in the lower
rear side of the body for storage of larger equipment such as exhaust fans.
In fact, the body provides an extra 21 cubic feet of storage space.
Contender custom pumper models offer anodized roll-up doors as standard
equipment with lap doors are available as an option.
All Contender custom pumpers carry a 10-year limited body structural
warranty.
|
Base Model Stock Custom Units
- 7049 Four (4) doors, Caterpilar C9, Side Control, A/C, Allison 3000
EVS P Automatic Transmission
- 7050 Four (4) doors, Caterpilar C9, Top Control, A/C, Allison 3000
EVS P Automatic Transmission
- 7051 Four (4) doors, Caterpilar C9, Top Control with Speed-lays,
A/C, Allison 3000 EVS P Automatic Transmission
Standard Chassis Features
- Aluminum cab with 6-person seating capacity
- 16,000 lb front axle, 16,000 lb spring suspension with shock
absorbers
- 24,000 lb rear axle, 31,000 lb spring suspension
- ABS anti-lock braking system, front disc and rear cam
- Two (2) group 8D batteries, 1400 CCA each
- Michelin 315 80R 22.5 20 ply front tires
- Michelin 12R 22.5 16 ply "XDN" (all season) rear tires
- Telescoping and tilt steering wheel
- West Coast mirrors with additional 6" round convex mirror
- Chrome tow hooks
- 340-amp alternator
- Load manager
- 18.7 CFM air compressor
- Jacobs exhaust brake
- Electric over hydraulic cab lift
- Drivers seat 911 knee action, air ride high back
- Officer seat 911 with SCBA and radio compartment under seat
- Two (2) forward facing SCBA crew seats
- Two (2) rear facing SCBA crew cab seats
- 65-gallon rear fuel tank
- Stainless steel fenders on front cab
- Air inlet (DS step well)
- Standard Body Features
Standard Body Features
- Full-height compartments on driver side and low compartments on
passenger side
- Full depth lower extended rear compartments both sides
- Anodized aluminum roll-up doors
- Aluminum body
- Spatter paint compartment interior finish
- Full height rear compartment with roll-up door
- 1000-gallon polypropylene water tank with 1.5" tank fill &
provisions for future installation of a Newton dump and 2.5" tank fill
- One adjustable hosebed divider
- Code-3 NFPA lighting package:
- Front lower zone- Two Code-3 OL135 red Oscilazers / Front upper
zone- Code-3 556A3 (all red lenses) light-bar
- Rear upper zone- Code-3 550F (one red and one amber) / Rear lower
zone- Code-3 4135BZ Halogen
- Side zone lower- Two Code-3 4135BZ Halogen red lights per side
control and three per top mount
- Tail lights, Weldon Tri-Light cluster (includes backup light)
- Ladders: 24' 2-section, 14' roof and 10' folding
- 15' of 6" soft suction hose
- Waterous 1250 gpm pump
- Stainless steel, brass, and flex hose for all plumbing
- Class One pressure governor
- Outlets - Two 2." discharge outlets (DS), one 2.5" outlet (PS), one
rear 2.5" discharge outlet, and two cross-lays
- 3" deluge riser outlet
- Color-coded tags
- Extruded aluminum rub-rails
- 10" Scotchlite stripe and Pierce number 90 red paint
- Standard Pierce body and paint warranties
|
