QUIC-FLIP® SCBA Holder
Pull the release pin to rotate the unit 90 degrees from the stored
position. Pull another pin and the unit drops down to donning position.
Flips are preset to swing either right or left out of the stored position.The basic Flip is 7-3/4" square. With the WALKAWAY bracket (ordered separately) mounted, the length is 23". Collapsed (at rest position) height of the unit is 2-1/4".
Part #557442110
Modified QUIC-FLIP® Holder
The modified QUIC-FLIP holder is ideal for use on engine compartments and Mattydales to hold SCBA in a horizontal position in its WALKAWAY bracket. The unit is similar to the standard model, but does not include a base plate. Instead, the modified holder flips up from the horizontal position to a vertical position, with SCBA ready for donning. Firefighter can simply stand on the step, flip the unit, and slip on SCBA. Also useful in rescue vehicles.Part #557442105
QUIC Swing Down
Now fire fighters can quickly slip into breathing apparatus from a comfortable standing position, even when SCBA is stored in high compartments. Swing devices are made of high tensile strength aluminum and are virtually maintenance free. The basic swing is 11-1/2" W x 23" L. QUIC-SWING units are used most often in shallow high side compartments. If the compartment is 12-14" deep, you may need to add an extension plate to allow the device to clear the compartment lid. If the compartment is over 14" deep, the swing device may be mounted on a QUIC-SLIDE extension plate.Part #557442100
