RESCUE

SAWS

Husqvarna K3600 Hydraulic Ring Saw

The Husqvarna K3600 is a cutter with performance and features that make it unique. The eccentric drive of the blade means the cutting depth is a huge 260 mm. Its unique power/weight ratio and its hydraulic drive make for a highly efficient and manoeuvrable handheld cutter. It is well suited to a wide range of applications, including both brick and reinforced concrete. The combination of large cutting depth and high capacity without set-up time make the K3600 one of the most productive tools in the business.

The cutting ring on the K3600 is fixed and supported by four roller bearings at the periphery of the blade. Two of these are guide runners that run in the slot on the side of the ring, pressing it forward and into a drive wheel, which gives better control and longer service life.

Features:

Hydraulic gear motor
Peripheral drive
Adjustable front handle
Automatic start for water flow
The machine’s unique power-to-weight ratio and hydraulic drive make for a very efficient and easily manoeuvrable handheld cutter
A 260 mm cutting depth with a 350 mm blade, thanks to the unique eccentric drive
Stable support rollers for easy adjustment and blade change
Sealed drive and roller system
Adjustable front handle and convenient, integrated water adjustment makes operation easier and more efficient
Large lower spray guard and integrated support foot
Low weight and ergonomic design
Simple service and cleaning
Hydraulic powered means you avoid exhaust fumes and high noise levels

TECHNICAL DATA
Power output	4.3 kW (5.8 hp)
Maximum hydraulic flow	40 l/min (10 gal/min)
Hydraulic pressure	140 bar
Blade diameter	350mm (14")
Max. cutting depth	260mm (10")
Weight (excl. cutting equipment)	8.1 kg (17.4 lbs.)
Vibration front handle	4.3 m/s²
Vibration rear handle	6 m/s²
Daily vibration exposure (A8)	2.12 m/s²
Daily vibration time (time factor)	1 hour
Daily vibration (Aeqv)	6 m/s²
Sound level	99 dB(A)
Sound power level, guaranteed (LWA)	111 dB(A)

Part #546010100