Quadrafog Nozzles 1½" Series

QuadraFog 1½" Series

The Quadrafog 1½"(38mm) Series has four selectable flow settings of 30, 60, 95 and 125 GPM at 100 PSI. The Quadrafog is an excellent choice for any 1½" hose line. The compact Quadrafog is an economical, lightweight, rugged and dependable selectable gallonage nozzle. All lightweight materials, hardcoat anodized aluminum. Flush without shutting down. Quick change rear valve seat and stainless steel shut-off ball. Pistol grip is mounted below the valve. The uniquely cut solid metal fixed fog teeth produce a wide range of patterns from narrow fog to extremely wide fog. Optional coloured pistol grips.

All 1½" Quadrafog nozzles are available with uniquely cut fixed fog teeth or stainless steel spinning fog teeth. The 1½" QuadraFog accept the FJ-LX-FQ FOAMJET low expansion and the FJ-MX-FQ FOAMJET multi-expansion foam aspiration attachment.

Part #465028102 1½", Tip Only with Spinning Teeth (1.9 lb., 6 7/8")
Part #465028106 1½", Ball Valve Shut-Off with Spinning Teeth (3 lbs., 8 3/8")
Part #465028110 1½", Ball Valve Shut-Off with Pistol Grip & Spinning Teeth (3.8 lbs., 8 3/8")

Nozzle Tested:
Quadrafog Part #465028102
Selectable gallonage nozzle with 4 flow settings of 30, 60, 95 and 125 gpm at 75 psi nozzle inlet pressure.
Stream Trajectory

Nozzle Tested:
Quadrafog Part #465028102
Selectable gallonage nozzle with 4 flow settings of 30, 60, 95 and 125 gpm at 100 psi nozzle inlet pressure.
Stream Trajectory

Nozzle Tested:
Quadrafog Part #465028102
Selectable gallonage nozzle with 4 flow settings of 30, 60, 95 and 125 gpm at 125 psi nozzle inlet pressure.

Stream Trajectory

NOTE: Stream trajectories shown are for no wind conditions at 30 degree elevation. Wind can substantially alter the shape and reach of the stream of any nozzle. Effective firefighting range of nozzles is shown. Maximum reach of last water drop is approximately 10% farther.

Parts Diagram
Instruction Manual