Sidewinder Wildland RC Monitor
[+] View Larger Image

Elkhart Sidewinder Remote Controlled Monitor

  • Allows for more effective use of personnel while reducing the potential risk of injury — controls can be mounted inside vehicle
  • Designed for wildland firefighting, de-icing, and dust abatement operations
  • Weather-tight connectorized harness
  • Epoxy encapsulated control module
  • Available in 12V or 24V for DC operation
  • Available with either a low-cost toggle box controller or full-sized joystick with integrated water valve trigger
  • Double ball races with stainless steel bearings
  • Available high speed water valve kit operates from joystick trigger
  • 2" Fully-vaned waterway
  • Fully enclosed stainless steel worm gears
  • Available normal or high-speed travel
  • Electric motors feature manual override
  • Elk-O-Lite® construction with red urethane enamel
  • Maximum 500gpm (1,893lpm)
  • 2" (51mm) NPT inlet
  • 1.5" (38mm) NHT outlet
  • Friction loss: 26 psi at 500 gpm; 13 psi at 350gpm; 4 psi at 200 gpm
  • Vertical travel from 45° below to 90° above horizontal
  • 360° horizontal travel
  • Maximum power requirement: 3.0 Amps at 12V DC (24V opt)
  • 22"h x 8.6"w (56cm x 21.7cm)
  • Weighs 16.5lbs. (7.5kg)

Part #445505100  Sidewinder monitor, toggle switch controller, 5000-04E 1.5" nozzle
Choose gpm of nozzle when ordering: 15, 30, or 45 gpm; 60, 95 or 125gpm; 175, 200, 250, or 300 gpm
Part #445505116  Optional joystick control box
Part #445505130  Optional CAF smooth bore tip (use with stream shaper)
Part #445505152  Optional stream shaper
Part #445505140  Optional Electric water shut-off valve to control monitor